fix: move enviroment variables to ssytem. Might be better to put them for future ??

.config/hypr/hypridle.conf

@@ -1,34 +0,0 @@
-general {
-    lock_cmd = pidof hyprlock || hyprlock       # avoid starting multiple hyprlock instances.
-    before_sleep_cmd = loginctl lock-session    # lock before suspend.
-    after_sleep_cmd = hyprctl dispatch dpms on  # to avoid having to press a key twice to turn on the display.
-}
-
-listener {
-    timeout = 150                                # 2.5min.
-    on-timeout = brightnessctl -s set 10         # set monitor backlight to minimum, avoid 0 on OLED monitor.
-    on-resume = brightnessctl -r                 # monitor backlight restore.
-}
-
-# turn off keyboard backlight, comment out this section if you dont have a keyboard backlight.
-listener { 
-    timeout = 150                                          # 2.5min.
-    on-timeout = brightnessctl -sd rgb:kbd_backlight set 0 # turn off keyboard backlight.
-    on-resume = brightnessctl -rd rgb:kbd_backlight        # turn on keyboard backlight.
-}
-
-listener {
-    timeout = 300                                 # 5min
-    on-timeout = loginctl lock-session            # lock screen when timeout has passed
-}
-
-listener {
-    timeout = 330                                                     # 5.5min
-    on-timeout = hyprctl dispatch dpms off                            # screen off when timeout has passed
-    on-resume = hyprctl dispatch dpms on && brightnessctl -r          # screen on when activity is detected after timeout has fired.
-}
-
-listener {
-    timeout = 1800                                # 30min
-    on-timeout = systemctl suspend                # suspend pc
-}

.config/hypr/hyprland.conf

@@ -1,371 +0,0 @@
-
-# #######################################################################################
-# AUTOGENERATED HYPRLAND CONFIG.
-# EDIT THIS CONFIG ACCORDING TO THE WIKI INSTRUCTIONS.
-# #######################################################################################
-
-autogenerated = 0 # remove this line to remove the warning
-
-# This is an example Hyprland config file.
-# Refer to the wiki for more information.
-# https://wiki.hypr.land/Configuring/
-
-# Please note not all available settings / options are set here.
-# For a full list, see the wiki
-
-# You can split this configuration into multiple files
-# Create your files separately and then link them to this file like this:
-# source = ~/.config/hypr/myColors.conf
-
-
-################
-### MONITORS ###
-################
-
-# See https://wiki.hypr.land/Configuring/Monitors/
-monitor=,preferred,auto,auto,
-
-workspace=name:1, monitor:DP-1
-exec-once=hyprctl dispatch workspace 1
-
-workspace=name:10, monitor:DP-2
-exec-once=hyprctl dispatch workspace 10
-
-
-###################
-### MY PROGRAMS ###
-###################
-
-# See https://wiki.hypr.land/Configuring/Keywords/
-
-# Set programs that you use
-$terminal = kitty
-$fileManager = nautilus
-$menu = wofi --show drun -GI
-
-
-#################
-### AUTOSTART ###
-#################
-
-# Autostart necessary processes (like notifications daemons, status bars, etc.)
-# Or execute your favorite apps at launch like this:
-
-# exec-once = $terminal
-# exec-once = nm-applet &
-# exec-once = waybar & hyprpaper & firefox
-exec-once = nm-applet &
-exec-once = blueman-applet &
-exec-once = shikane &
-exec-once = waybar -c ~/.config/hypr/waybar/config.jsonc -s ~/.config/hypr/waybar/style.css &
-exec-once = hyprpm reload -n
-exec-once = flatpak run com.github.wwmm.easyeffects -w
-exec-once = systemctl --user start hyprpolkitagent
-exec-once = hypridle
-                         
-
-#############################
-### ENVIRONMENT VARIABLES ###
-#############################
-
-# See https://wiki.hypr.land/Configuring/Environment-variables/
-
-env = XCURSOR_SIZE,24
-env = HYPRCURSOR_SIZE,24
-
-env = GDK_BACKEND,wayland,x11
-env = QT_QPA_PLATFORM,wayland;xcb
-env = ELECTRON_OZONE_PLATFORM_HINT,auto
-
-
-###################
-### PERMISSIONS ###
-###################
-
-# See https://wiki.hypr.land/Configuring/Permissions/
-# Please note permission changes here require a Hyprland restart and are not applied on-the-fly
-# for security reasons
-
-# ecosystem {
-#   enforce_permissions = 1
-# }
-
-permission = /usr/(bin|local/bin)/grim, screencopy, allow
-permission = /usr/(lib|libexec|lib64)/xdg-desktop-portal-hyprland, screencopy, allow
-permission = /usr/(bin|local/bin)/hyprpm, plugin, allow
-
-
-#####################
-### LOOK AND FEEL ###
-#####################
-
-# Refer to https://wiki.hypr.land/Configuring/Variables/
-
-# https://wiki.hypr.land/Configuring/Variables/#general
-general {
-    gaps_in = 4
-    gaps_out = 4
-
-    border_size = 1
-
-    # https://wiki.hypr.land/Configuring/Variables/#variable-types for info about colors
-    col.active_border = rgba(33ccffee) rgba(00ff99ee) 45deg
-    col.inactive_border = rgba(595959aa)
-
-    # Set to true enable resizing windows by clicking and dragging on borders and gaps
-    resize_on_border = false
-
-    # Please see https://wiki.hypr.land/Configuring/Tearing/ before you turn this on
-    allow_tearing = false
-
-    #layout = dwindle
-    layout = hy3
-}
-
-
-# https://wiki.hypr.land/Configuring/Variables/#decoration
-decoration {
-    rounding = 4
-    rounding_power = 2
-
-    # Change transparency of focused and unfocused windows
-    active_opacity = 1.0
-    inactive_opacity = 1.0
-
-    shadow {
-        enabled = false
-        range = 4
-        render_power = 3
-        color = rgba(1a1a1aee)
-    }
-
-    # https://wiki.hypr.land/Configuring/Variables/#blur
-    blur {
-        enabled = false
-        size = 3
-        passes = 1
-
-        vibrancy = 0.1696
-    }
-}
-
-# https://wiki.hypr.land/Configuring/Variables/#animations
-animations {
-    #enabled = yes, please :)
-    enabled = false
-
-    # Default curves, see https://wiki.hypr.land/Configuring/Animations/#curves
-    #        NAME,           X0,   Y0,   X1,   Y1
-    bezier = easeOutQuint,   0.23, 1,    0.32, 1
-    bezier = easeInOutCubic, 0.65, 0.05, 0.36, 1
-    bezier = linear,         0,    0,    1,    1
-    bezier = almostLinear,   0.5,  0.5,  0.75, 1
-    bezier = quick,          0.15, 0,    0.1,  1
-
-    # Default animations, see https://wiki.hypr.land/Configuring/Animations/
-    #           NAME,          ONOFF, SPEED, CURVE,        [STYLE]
-    animation = global,        1,     10,    default
-    animation = border,        1,     5.39,  easeOutQuint
-    animation = windows,       1,     4.79,  easeOutQuint
-    animation = windowsIn,     1,     4.1,   easeOutQuint, popin 87%
-    animation = windowsOut,    1,     1.49,  linear,       popin 87%
-    animation = fadeIn,        1,     1.73,  almostLinear
-    animation = fadeOut,       1,     1.46,  almostLinear
-    animation = fade,          1,     3.03,  quick
-    animation = layers,        1,     3.81,  easeOutQuint
-    animation = layersIn,      1,     4,     easeOutQuint, fade
-    animation = layersOut,     1,     1.5,   linear,       fade
-    animation = fadeLayersIn,  1,     1.79,  almostLinear
-    animation = fadeLayersOut, 1,     1.39,  almostLinear
-    animation = workspaces,    1,     1.94,  almostLinear, fade
-    animation = workspacesIn,  1,     1.21,  almostLinear, fade
-    animation = workspacesOut, 1,     1.94,  almostLinear, fade
-    animation = zoomFactor,    1,     7,     quick
-}
-
-# Ref https://wiki.hypr.land/Configuring/Workspace-Rules/
-# "Smart gaps" / "No gaps when only"
-# uncomment all if you wish to use that.
-# workspace = w[tv1], gapsout:0, gapsin:0
-# workspace = f[1], gapsout:0, gapsin:0
-# windowrule = bordersize 0, floating:0, onworkspace:w[tv1]
-# windowrule = rounding 0, floating:0, onworkspace:w[tv1]
-# windowrule = bordersize 0, floating:0, onworkspace:f[1]
-# windowrule = rounding 0, floating:0, onworkspace:f[1]
-
-# See https://wiki.hypr.land/Configuring/Dwindle-Layout/ for more
-dwindle {
-    pseudotile = true # Master switch for pseudotiling. Enabling is bound to mainMod + P in the keybinds section below
-    preserve_split = true # You probably want this
-}
-
-# See https://wiki.hypr.land/Configuring/Master-Layout/ for more
-master {
-    new_status = master
-}
-
-# https://wiki.hypr.land/Configuring/Variables/#misc
-misc {
-    force_default_wallpaper = 0 # Set to 0 or 1 to disable the anime mascot wallpapers
-    disable_hyprland_logo = true# If true disables the random hyprland logo / anime girl background. :(
-    vfr = true
-}
-
-
-#############
-### INPUT ###
-#############
-
-# https://wiki.hypr.land/Configuring/Variables/#input
-input {
-    kb_layout = us
-    kb_variant =
-    kb_model =
-    kb_options =
-    kb_rules =
-
-    follow_mouse = 1
-
-    sensitivity = 0 # -1.0 - 1.0, 0 means no modification.
-
-    touchpad {
-        natural_scroll = false
-        tap-to-click = false
-    }
-}
-
-# See https://wiki.hypr.land/Configuring/Gestures
-gesture = 3, horizontal, workspace
-
-# Example per-device config
-# See https://wiki.hypr.land/Configuring/Keywords/#per-device-input-configs for more
-device {
-    name = epic-mouse-v1
-    sensitivity = -0.5
-}
-
-
-###################
-### KEYBINDINGS ###
-###################
-
-# See https://wiki.hypr.land/Configuring/Keywords/
-$mainMod = SUPER # Sets "Windows" key as main modifier
-
-# Example binds, see https://wiki.hypr.land/Configuring/Binds/ for more
-bind = $mainMod, RETURN, exec, $terminal
-bind = $mainMod, D, exec, $menu
-bind = $mainMod, F, fullscreen
-bind = $mainMod SHIFT, SPACE, togglefloating,
-bind = $mainMod SHIFT, Q, hy3:killactive,
-bind = $mainMod SHIFT, M, exit,
-bind = $mainMod SHIFT, S, pin
-
-
-bind = $mainMod, B, hy3:makegroup, h
-bind = $mainMod, V, hy3:makegroup, v
-bind = $mainMod, W, hy3:makegroup, tab
-bind = $mainMod, A, hy3:changefocus, raise
-bind = $mainMod, X, hy3:locktab
-bind = $mainMod, E, hy3:expand, expand
-bind = $mainMod, R, hy3:changegroup, opposite
-bind = $mainMod SHIFT, A, hy3:changefocus, lower
-bind = $mainMod SHIFT, E, hy3:expand, base
-
-# Move focus with mainMod + arrow keys
-bind = $mainMod, h, hy3:movefocus, l
-bind = $mainMod, j, hy3:movefocus, d
-bind = $mainMod, k, hy3:movefocus, u
-bind = $mainMod, l, hy3:movefocus, r
-bind = $mainMod, left, hy3:movefocus, l
-bind = $mainMod, down, hy3:movefocus, d
-bind = $mainMod, up, hy3:movefocus, u
-bind = $mainMod, right, hy3:movefocus, r
-
-
-bind = $mainMod SHIFT, h, hy3:movewindow, l, once
-bind = $mainMod SHIFT, j, hy3:movewindow, d, once
-bind = $mainMod SHIFT, k, hy3:movewindow, u, once
-bind = $mainMod SHIFT, l, hy3:movewindow, r, once
-bind = $mainMod SHIFT, left, hy3:movewindow, l, once
-bind = $mainMod SHIFT, down, hy3:movewindow, d, once
-bind = $mainMod SHIFT, up, hy3:movewindow, u, once
-bind = $mainMod SHIFT, right, hy3:movewindow, r, once
-
-# Switch workspaces with mainMod + [0-9]
-bind = $mainMod, 1, workspace, 1
-bind = $mainMod, 2, workspace, 2
-bind = $mainMod, 3, workspace, 3
-bind = $mainMod, 4, workspace, 4
-bind = $mainMod, 5, workspace, 5
-bind = $mainMod, 6, workspace, 6
-bind = $mainMod, 7, workspace, 7
-bind = $mainMod, 8, workspace, 8
-bind = $mainMod, 9, workspace, 9
-bind = $mainMod, 0, workspace, 10
-
-# Move active window to a workspace with mainMod + SHIFT + [0-9]
-bind = $mainMod SHIFT, 1, hy3:movetoworkspace, 1
-bind = $mainMod SHIFT, 2, hy3:movetoworkspace, 2
-bind = $mainMod SHIFT, 3, hy3:movetoworkspace, 3
-bind = $mainMod SHIFT, 4, hy3:movetoworkspace, 4
-bind = $mainMod SHIFT, 5, hy3:movetoworkspace, 5
-bind = $mainMod SHIFT, 6, hy3:movetoworkspace, 6
-bind = $mainMod SHIFT, 7, hy3:movetoworkspace, 7
-bind = $mainMod SHIFT, 8, hy3:movetoworkspace, 8
-bind = $mainMod SHIFT, 9, hy3:movetoworkspace, 9
-bind = $mainMod SHIFT, 0, hy3:movetoworkspace, 10
-
-#workspace = name:10, monitor:DP-3
-#exec-once = hyperctl dispatch workspace 10
-
-#workspace = name:1, monitor:DP-2
-#exec-once = hyperctl dispatch workspace 1
-
-
-
-# Example special workspace (scratchpad)
-bind = $mainMod, MINUS, togglespecialworkspace, magic
-bind = $mainMod SHIFT, MINUS, movetoworkspace, special:magic
-
-# Scroll through existing workspaces with mainMod + scroll
-bind = $mainMod, mouse_down, workspace, e+1
-bind = $mainMod, mouse_up, workspace, e-1
-
-# Move/resize windows with mainMod + LMB/RMB and dragging
-bindm = $mainMod, mouse:272, movewindow
-bindm = $mainMod, mouse:273, resizewindow
-
-# Laptop multimedia keys for volume and LCD brightness
-bindel = ,XF86AudioRaiseVolume, exec, wpctl set-volume -l 1 @DEFAULT_AUDIO_SINK@ 5%+
-bindel = ,XF86AudioLowerVolume, exec, wpctl set-volume @DEFAULT_AUDIO_SINK@ 5%-
-bindel = ,XF86AudioMute, exec, wpctl set-mute @DEFAULT_AUDIO_SINK@ toggle
-bindel = ,XF86AudioMicMute, exec, wpctl set-mute @DEFAULT_AUDIO_SOURCE@ toggle
-bindel = ,XF86MonBrightnessUp, exec, brightnessctl -e4 -n2 set 5%+
-bindel = ,XF86MonBrightnessDown, exec, brightnessctl -e4 -n2 set 5%-
-
-# Requires playerctl
-bindl = , XF86AudioNext, exec, playerctl next
-bindl = , XF86AudioPause, exec, playerctl play-pause
-bindl = , XF86AudioPlay, exec, playerctl play-pause
-bindl = , XF86AudioPrev, exec, playerctl previous
-
-##############################
-### WINDOWS AND WORKSPACES ###
-##############################
-
-# See https://wiki.hypr.land/Configuring/Window-Rules/ for more
-# See https://wiki.hypr.land/Configuring/Workspace-Rules/ for workspace rules
-
-# Example windowrule
-# windowrule = float,class:^(kitty)$,title:^(kitty)$
-
-# Ignore maximize requests from apps. You'll probably like this.
-#windowrule = suppressevent maximize, class:.*
-
-# Fix some dragging issues with XWayland
-#windowrule = nofocus,class:^$,title:^$,xwayland:1,floating:1,fullscreen:0,pinned:0
-
-
-bindel = $mainMod, p, exec, grimshot --notify savecopy anything
-bind = $mainMod, M, exec, hyprlock; playerctl pause

.config/hypr/hyprlock.conf

@@ -1,22 +0,0 @@
-background {
-  monitor = # monitor-agnostic
-  blur_passes = 1
-  blur_size = 7
-}
-
-input-field {
-  monitor =
-  size = 10%, 3%
-  font_family = Noto Sans
-  dots_size = 0.08
-  position = 0, -200
-  fade_on_empty = false
-}
-
-
-label {
-  monitor =
-  text = $TIME
-  font_size = 80
-  position = 0,0
-}

.config/hypr/waybar/config.jsonc

@@ -1,118 +0,0 @@
-// -*- mode: jsonc -*-
-{
-    "spacing": 2, // Gaps between modules (4px)
-    "modules-left": [
-        "hyprland/workspaces",
-        "hyprland/mode",
-        "hyprland/scratchpad",
-        "hyprland/window"
-    ],
-    "modules-center": [
-      //"sway/window"
-      "clock",
-    ],
-    "modules-right": [
-        //"mpd",
-        "pulseaudio",
-        //"network",
-        "battery",
-        "tray"
-        //"custom/power"
-    ],
-    "sway/mode": {
-        "format": "<span style=\"italic\">{}</span>"
-    },
-    "sway/scratchpad": {
-        "format": "{icon} {count}",
-        "show-empty": false,
-        "format-icons": ["", ""],
-        "tooltip": true,
-        "tooltip-format": "{app}: {title}"
-    },
-    "tray": {
-        // "icon-size": 21,
-        "spacing": 10,
-        // "icons": {
-        //   "blueman": "bluetooth",
-        //   "TelegramDesktop": "$HOME/.local/share/icons/hicolor/16x16/apps/telegram.png"
-        // }
-    },
-    "clock": {
-        //"timezone": "America/Los_Angeles",
-        "tooltip-format": "<big>{:%Y %B}</big>\n<tt><small>{calendar}</small></tt>",
-				"format": "{:%r %Y-%m-%d}",
-				//"format": "{:%R %p  %Y-%m-%d}",
-        //"format-alt": "{:%Y-%m-%d}"
-    },
-    "battery": {
-        "states": {
-            // "good": 95,
-            "warning": 30,
-            "critical": 15
-        },
-		//"format": "{time} {capacity}% {icon}",
-		"format": "{capacity}% {icon}",
-        "format-full": "{capacity}% {icon}",
-        "format-charging": "{capacity}% C",
-        "format-plugged": "{capacity}% P",
-        "format-alt": "{time} {icon}",
-        // "format-good": "", // An empty format will hide the module
-        // "format-full": "",
-        "format-icons": ["", "", "", "", ""]
-    },
-    "battery#bat2": {
-        "bat": "BAT2"
-    },
-    "power-profiles-daemon": {
-      "format": "{icon}",
-      "tooltip-format": "Power profile: {profile}\nDriver: {driver}",
-      "tooltip": true,
-      "format-icons": {
-        "default": "",
-        "performance": "",
-        "balanced": "",
-        "power-saver": ""
-      }
-    },
-    "network": {
-        // "interface": "wlp2*", // (Optional) To force the use of this interface
-        //"format-wifi": "{essid} ({signalStrength}%) ",
-        //"format-ethernet": "{ipaddr}/{cidr} ",
-        //"tooltip-format": "{ifname} via {gwaddr} ",
-        //"format-linked": "{ifname} (No IP) ",
-        //"format-disconnected": "Disconnected ⚠",
-        "format-disconnected": "Disconnected",
-        "format-alt": "{ifname}: {ipaddr}/{cidr}"
-    },
-    "pulseaudio": {
-        // "scroll-step": 1, // %, can be a float
-        "format": "{volume}%  {icon}   {format_source}",
-        "format-bluetooth": "{volume}% {icon}  {format_source}",
-        "format-bluetooth-muted": "  {icon}  {format_source}",
-        "format-muted": " {format_source}",
-        "format-source": "{volume}% ",
-        "format-source-muted": "",
-        "format-icons": {
-            "headphone": "",
-            "hands-free": "",
-            "headset": "",
-            "phone": "",
-            "portable": "",
-            "car": "",
-            "default": ["", "", ""]
-        },
-        "on-click": "pavucontrol"
-    },
-    "custom/media": {
-        "format": "{icon} {text}",
-        "return-type": "json",
-        "max-length": 40,
-        "format-icons": {
-            "spotify": "",
-            "default": "🎜"
-        },
-        "escape": true,
-        "exec": "$HOME/.config/waybar/mediaplayer.py 2> /dev/null" // Script in resources folder
-        // "exec": "$HOME/.config/waybar/mediaplayer.py --player spotify 2> /dev/null" // Filter player based on name
-    }
-}

.config/hypr/waybar/style.css

@@ -1,321 +0,0 @@
-* {
-    /* `otf-font-awesome` is required to be installed for icons */
-    /*font-family: FontAwesome, Roboto, Helvetica, Arial, sans-serif; */
-	/*font-family: "JetBrainsMono NF";*/
-    font-family: "JetBrainsMonoNFM-Regular";
-    font-size: 13px;
-    font-weight: bold;
-}
-
-window#waybar {
-    /*background-color: rgba(43, 48, 59, 0.5);
-    border-bottom: 3px solid rgba(100, 114, 125, 0.5); */
-    background-color: rgba(0, 0, 0, 1);
-    color: #ffffff;
-    transition-property: background-color;
-    transition-duration: .5s;
-}
-
-window#waybar.hidden {
-    opacity: 0.2;
-}
-
-window#waybar.empty {
-    /*background-color: transparent;*/
-}
-window#waybar.solo {
-    /*background-color: #FFFFFF;*/
-}
-
-
-button {
-    /* Use box-shadow instead of border so the text isn't offset */
-    box-shadow: inset 0 -3px transparent;
-    /* Avoid rounded borders under each button name */
-    border: none;
-    border-radius: 0;
-}
-
-/* https://github.com/Alexays/Waybar/wiki/FAQ#the-workspace-buttons-have-a-strange-hover-effect */
-button:hover {
-    background: inherit;
-    box-shadow: inset 0 -3px #ffffff;
-}
-
-/* you can set a style on hover for any module like this */
-#pulseaudio:hover {
-    /*background-color: #a37800;*/
-}
-
-#workspaces button {
-    padding: 0 4px;
-    /*background-color: transparent;*/
-    color: #ffffff;
-}
-
-#workspaces button:hover {
-    background: rgba(0, 0, 0, 0.2);
-}
-
-#workspaces button.focused {
-    background-color: #64727D;
-    /*box-shadow: inset 0 -3px #ffffff;*/
-}
-
-#workspaces button.urgent {
-    background-color: #eb4d4b;
-}
-
-#mode {
-    background-color: #64727D;
-    box-shadow: inset 0 -3px #ffffff;
-}
-
-#clock,
-#battery,
-#cpu,
-#memory,
-#disk,
-#temperature,
-#backlight,
-#network,
-#pulseaudio,
-#wireplumber,
-#custom-media,
-#tray,
-#mode,
-#idle_inhibitor,
-#scratchpad,
-#power-profiles-daemon,
-#mpd {
-    padding: 0 10px;
-    color: #ffffff;
-}
-
-#window,
-#workspaces {
-    margin: 0 4px;
-}
-
-/* If workspaces is the leftmost module, omit left margin */
-.modules-left > widget:first-child > #workspaces {
-    margin-left: 0;
-}
-
-/* If workspaces is the rightmost module, omit right margin */
-.modules-right > widget:last-child > #workspaces {
-    margin-right: 0;
-}
-
-#clock {
-   /* background-color: #64727D;*/
-}
-
-#battery {
-    /*background-color: #ffffff;
-    color: #000000;*/
-}
-
-#battery.charging, #battery.plugged {
-    /*color: #ffffff;
-    background-color: #26A65B;*/
-}
-
-@keyframes blink {
-    to {
-        background-color: #ffffff;
-        color: #000000;
-    }
-}
-
-/* Using steps() instead of linear as a timing function to limit cpu usage */
-#battery.critical:not(.charging) {
-    background-color: #f53c3c;
-    color: #ffffff;
-    animation-name: blink;
-    animation-duration: 0.5s;
-    animation-timing-function: steps(12);
-    animation-iteration-count: infinite;
-    animation-direction: alternate;
-}
-
-#power-profiles-daemon {
-    padding-right: 15px;
-}
-
-#power-profiles-daemon.performance {
-    background-color: #f53c3c;
-    color: #ffffff;
-}
-
-#power-profiles-daemon.balanced {
-    background-color: #2980b9;
-    color: #ffffff;
-}
-
-#power-profiles-daemon.power-saver {
-    background-color: #2ecc71;
-    color: #000000;
-}
-
-label:focus {
-    background-color: #000000;
-}
-
-#cpu {
-    background-color: #2ecc71;
-    color: #000000;
-}
-
-#memory {
-    background-color: #9b59b6;
-}
-
-#disk {
-    background-color: #964B00;
-}
-
-#backlight {
-    background-color: #90b1b1;
-}
-
-#network {
-    /*background-color: #2980b9;*/
-}
-
-#network.disconnected {
-    /*background-color: #f53c3c;*/
-}
-
-#pulseaudio {
-    /*background-color: #f1c40f;*/
-    /*color: #000000;*/
-}
-
-#pulseaudio.muted {
-    /*background-color: #90b1b1;*/
-    /*color: #2a5c45;*/
-}
-
-#wireplumber {
-    background-color: #fff0f5;
-    color: #000000;
-}
-
-#wireplumber.muted {
-    background-color: #f53c3c;
-}
-
-#custom-media {
-    background-color: #66cc99;
-    color: #2a5c45;
-    min-width: 100px;
-}
-
-#custom-media.custom-spotify {
-    background-color: #66cc99;
-}
-
-#custom-media.custom-vlc {
-    background-color: #ffa000;
-}
-
-#temperature {
-    background-color: #f0932b;
-}
-
-#temperature.critical {
-    background-color: #eb4d4b;
-}
-
-#tray {
-    /*background-color: #2980b9;*/
-}
-
-#tray > .passive {
-    -gtk-icon-effect: dim;
-}
-
-#tray > .needs-attention {
-    -gtk-icon-effect: highlight;
-    background-color: #eb4d4b;
-}
-
-#idle_inhibitor {
-    background-color: #2d3436;
-}
-
-#idle_inhibitor.activated {
-    background-color: #ecf0f1;
-    color: #2d3436;
-}
-
-#mpd {
-    background-color: #66cc99;
-    color: #2a5c45;
-}
-
-#mpd.disconnected {
-    background-color: #f53c3c;
-}
-
-#mpd.stopped {
-    background-color: #90b1b1;
-}
-
-#mpd.paused {
-    background-color: #51a37a;
-}
-
-#language {
-    background: #00b093;
-    color: #740864;
-    padding: 0 5px;
-    margin: 0 5px;
-    min-width: 16px;
-}
-
-#keyboard-state {
-    background: #97e1ad;
-    color: #000000;
-    padding: 0 0px;
-    margin: 0 5px;
-    min-width: 16px;
-}
-
-#keyboard-state > label {
-    padding: 0 5px;
-}
-
-#keyboard-state > label.locked {
-    background: rgba(0, 0, 0, 0.2);
-}
-
-#scratchpad {
-    background: rgba(0, 0, 0, 0.2);
-}
-
-#scratchpad.empty {
-	background-color: transparent;
-}
-
-#privacy {
-    padding: 0;
-}
-
-#privacy-item {
-    padding: 0 5px;
-    color: white;
-}
-
-#privacy-item.screenshare {
-    background-color: #cf5700;
-}
-
-#privacy-item.audio-in {
-    background-color: #1ca000;
-}
-
-#privacy-item.audio-out {
-    background-color: #0069d4;
-}

.config/i3/config

@@ -1,215 +0,0 @@
-# This file has been auto-generated by i3-config-wizard(1).
-# It will not be overwritten, so edit it as you like.
-#
-# Should you change your keyboard layout some time, delete
-# this file and re-run i3-config-wizard(1).
-#
-
-# i3 config file (v4)
-#
-# Please see https://i3wm.org/docs/userguide.html for a complete reference!
-
-set $mod Mod1
-
-# Font for window titles. Will also be used by the bar unless a different font
-# is used in the bar {} block below.
-#font pango:monospace 10
-font pango:JetBrainsMono NF 10
-
-# This font is widely installed, provides lots of unicode glyphs, right-to-left
-# text rendering and scalability on retina/hidpi displays (thanks to pango).
-#font pango:DejaVu Sans Mono 8
-
-# Start XDG autostart .desktop files using dex. See also
-# https://wiki.archlinux.org/index.php/XDG_Autostart
-exec --no-startup-id dex --autostart --environment i3
-
-# The combination of xss-lock, nm-applet and pactl is a popular choice, so
-# they are included here as an example. Modify as you see fit.
-
-# xss-lock grabs a logind suspend inhibit lock and will use i3lock to lock the
-# screen before suspend. Use loginctl lock-session to lock your screen.
-exec --no-startup-id xss-lock --transfer-sleep-lock -- i3lock --nofork
-
-# NetworkManager is the most popular way to manage wireless networks on Linux,
-# and nm-applet is a desktop environment-independent system tray GUI for it.
-exec --no-startup-id nm-applet
-
-# Use pactl to adjust volume in PulseAudio.
-set $refresh_i3status killall -SIGUSR1 i3status
-bindsym XF86AudioRaiseVolume exec --no-startup-id pactl set-sink-volume @DEFAULT_SINK@ +10% && $refresh_i3status
-bindsym XF86AudioLowerVolume exec --no-startup-id pactl set-sink-volume @DEFAULT_SINK@ -10% && $refresh_i3status
-bindsym XF86AudioMute exec --no-startup-id pactl set-sink-mute @DEFAULT_SINK@ toggle && $refresh_i3status
-bindsym XF86AudioMicMute exec --no-startup-id pactl set-source-mute @DEFAULT_SOURCE@ toggle && $refresh_i3status
-
-# Use Mouse+$mod to drag floating windows to their wanted position
-floating_modifier $mod
-
-# move tiling windows via drag & drop by left-clicking into the title bar,
-# or left-clicking anywhere into the window while holding the floating modifier.
-tiling_drag modifier titlebar
-
-# start a terminal
-bindsym $mod+Return exec kitty --single-instance
-#bindsym $mod+Return exec ghostty 
-
-# kill focused window
-bindsym $mod+Shift+q kill
-
-# start dmenu (a program launcher)
-bindsym $mod+d exec --no-startup-id rofi -show drun
-# A more modern dmenu replacement is rofi:
-# bindcode $mod+40 exec "rofi -modi drun,run -show drun"
-# There also is i3-dmenu-desktop which only displays applications shipping a
-# .desktop file. It is a wrapper around dmenu, so you need that installed.
-# bindcode $mod+40 exec --no-startup-id i3-dmenu-desktop
-
-# change focus
-bindsym $mod+h focus left
-bindsym $mod+j focus down
-bindsym $mod+k focus up
-bindsym $mod+l focus right
-
-# alternatively, you can use the cursor keys:
-bindsym $mod+Left focus left
-bindsym $mod+Down focus down
-bindsym $mod+Up focus up
-bindsym $mod+Right focus right
-
-# move focused window
-bindsym $mod+Shift+h move left
-bindsym $mod+Shift+j move down
-bindsym $mod+Shift+k move up
-bindsym $mod+Shift+l move right
-
-# alternatively, you can use the cursor keys:
-bindsym $mod+Shift+Left move left
-bindsym $mod+Shift+Down move down
-bindsym $mod+Shift+Up move up
-bindsym $mod+Shift+Right move right
-
-# split in horizontal orientation
-#bindsym $mod+h split h
-
-# split in vertical orientation
-bindsym $mod+v split v
-
-# enter fullscreen mode for the focused container
-bindsym $mod+f fullscreen toggle
-
-# change container layout (stacked, tabbed, toggle split)
-bindsym $mod+s layout stacking
-bindsym $mod+w layout tabbed
-bindsym $mod+e layout toggle split
-
-# toggle tiling / floating
-bindsym $mod+Shift+space floating toggle
-
-# change focus between tiling / floating windows
-bindsym $mod+space focus mode_toggle
-
-# focus the parent container
-bindsym $mod+a focus parent
-
-# focus the child container
-#bindsym $mod+d focus child
-
-bindsym $mod+p exec spectacle -rb
-
-
-# Define names for default workspaces for which we configure key bindings later on.
-# We use variables to avoid repeating the names in multiple places.
-set $ws1 "1"
-set $ws2 "2"
-set $ws3 "3"
-set $ws4 "4"
-set $ws5 "5"
-set $ws6 "6"
-set $ws7 "7"
-set $ws8 "8"
-set $ws9 "9"
-set $ws10 "10"
-
-# switch to workspace
-bindsym $mod+1 workspace number $ws1
-bindsym $mod+2 workspace number $ws2
-bindsym $mod+3 workspace number $ws3
-bindsym $mod+4 workspace number $ws4
-bindsym $mod+5 workspace number $ws5
-bindsym $mod+6 workspace number $ws6
-bindsym $mod+7 workspace number $ws7
-bindsym $mod+8 workspace number $ws8
-bindsym $mod+9 workspace number $ws9
-bindsym $mod+0 workspace number $ws10
-
-# move focused container to workspace
-bindsym $mod+Shift+1 move container to workspace number $ws1
-bindsym $mod+Shift+2 move container to workspace number $ws2
-bindsym $mod+Shift+3 move container to workspace number $ws3
-bindsym $mod+Shift+4 move container to workspace number $ws4
-bindsym $mod+Shift+5 move container to workspace number $ws5
-bindsym $mod+Shift+6 move container to workspace number $ws6
-bindsym $mod+Shift+7 move container to workspace number $ws7
-bindsym $mod+Shift+8 move container to workspace number $ws8
-bindsym $mod+Shift+9 move container to workspace number $ws9
-bindsym $mod+Shift+0 move container to workspace number $ws10
-
-# reload the configuration file
-bindsym $mod+Shift+c reload
-# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
-bindsym $mod+Shift+r restart
-# exit i3 (logs you out of your X session)
-bindsym $mod+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -B 'Yes, exit i3' 'i3-msg exit'"
-
-bindsym $mod+Shift+s sticky toggle
-
-# resize window (you can also use the mouse for that)
-mode "resize" {
-        # These bindings trigger as soon as you enter the resize mode
-
-        # Pressing left will shrink the window’s width.
-        # Pressing right will grow the window’s width.
-        # Pressing up will shrink the window’s height.
-        # Pressing down will grow the window’s height.
-        bindsym h resize shrink width 10 px or 10 ppt
-        bindsym j resize grow height 10 px or 10 ppt
-        bindsym k resize shrink height 10 px or 10 ppt
-        bindsym l resize grow width 10 px or 10 ppt
-
-        # same bindings, but for the arrow keys
-        bindsym Left resize shrink width 10 px or 10 ppt
-        bindsym Down resize grow height 10 px or 10 ppt
-        bindsym Up resize shrink height 10 px or 10 ppt
-        bindsym Right resize grow width 10 px or 10 ppt
-
-        # back to normal: Enter or Escape or $mod+r
-        bindsym Return mode "default"
-        bindsym Escape mode "default"
-        bindsym $mod+r mode "default"
-}
-
-bindsym $mod+r mode "resize"
-
-# Start i3bar to display a workspace bar (plus the system information i3status
-# finds out, if available)
-bar {
-	status_command i3blocks
-	position bottom
-}
-
-# Make the currently focused window a scratchpad
-bindsym $mod+Shift+minus move scratchpad
-# Show the first scratchpad window
-bindsym $mod+minus scratchpad show
-
-gaps inner 4
-gaps outer 4
-
-
-exec --no-startup-id pipewire
-exec --no-startup-id picom -b 
-exec --no-startup-id dunst
-
-
-exec xrandr --output DP-2 --auto -r 144
-

.config/kitty/kitty.conf

@@ -1,9 +1,7 @@
-#font_family family='JetBrainsMono Nerd Font Mono'
+font_family      'JetBrainsMono NF'
-#font_family family='JetBrainsMono'
-font_family family='JetBrainsMonoNFM-Regular'
 font_size 10.5
 
-#text_composition_strategy legacy
+text_composition_strategy legacy
 modify_font cell_width 95%
 
 cursor_trail 10
@@ -13,5 +11,6 @@ cursor_trail_decay 0.01 0.15
 cursor_shape block
 cursor_blink true
 
-linux_display_server wayland
+map cmd+c        copy_to_clipboard
-wayland_enable_ime yes
+map cmd+v        paste_from_clipboard
+map shift+insert paste_from_clipboard

.config/mango/autostart.sh

@@ -1,28 +0,0 @@
-#! /bin/bash
-
-set +e
-
-# wallpaper
-#swaybg -i ~/.config/mango/wallpaper/room.png &
-
-# top bar
-waybar -c ~/.config/mango/waybar/config.jsonc -s ~/.config/mango/waybar/style.css &
-
-# keep clipboard content
-wl-clip-persist --clipboard regular --reconnect-tries 0 &
-
-# clipboard content manager
-wl-paste --type text --watch cliphist store & 
-
-
-# START UP
-systemctl --user start shikane &
-systemctl --user start sway-audio-idle-inhibit &
-
-#pipewire &
-swaync &
-dex -a &
-
-# screen record or share
-dbus-update-activation-environment --systemd WAYLAND_DISPLAY XDG_CURRENT_DESKTOP=wlroots
-/usr/lib/xdg-desktop-portal-wlr &

.config/mango/config.conf

@@ -1,283 +0,0 @@
-# More option see https://github.com/DreamMaoMao/mango/wiki/
-
-# Window effect
-blur=1
-blur_layer=0
-blur_optimized=1
-blur_params_num_passes = 2
-blur_params_radius = 5
-blur_params_noise = 0.02
-blur_params_brightness = 0.9
-blur_params_contrast = 0.9
-blur_params_saturation = 1.2
-
-shadows = 1
-layer_shadows = 0
-shadow_only_floating = 1
-shadows_size = 5
-shadows_blur = 15
-shadows_position_x = 0
-shadows_position_y = 0
-shadowscolor= 0x000000ff
-
-border_radius=6
-no_radius_when_single=0
-focused_opacity=1.0
-unfocused_opacity=1.0
-
-# Animation Configuration(support type:zoom,slide)
-# tag_animation_direction: 0-horizontal,1-vertical
-animations=1
-layer_animations=1
-animation_type_open=slide
-animation_type_close=slide
-animation_fade_in=1
-animation_fade_out=1
-tag_animation_direction=1
-zoom_initial_ratio=0.3
-zoom_end_ratio=0.8
-fadein_begin_opacity=0.5
-fadeout_begin_opacity=0.8
-animation_duration_move=200
-animation_duration_open=200
-animation_duration_tag=250
-animation_duration_close=200
-animation_curve_open=0.46,1.0,0.29,1
-animation_curve_move=0.46,1.0,0.29,1
-animation_curve_tag=0.46,1.0,0.29,1
-animation_curve_close=0.08,0.92,0,1
-
-# Scroller Layout Setting
-scroller_structs=20
-scroller_default_proportion=1.0
-scroller_focus_center=0
-scroller_prefer_center=0
-edge_scroller_pointer_focus=1
-scroller_default_proportion_single=1.0
-scroller_proportion_preset=1.0,1.0,1.0
-
-# Master-Stack Layout Setting
-new_is_master=0
-default_mfact=0.55
-default_nmaster=1
-smartgaps=0
-
-# Overview Setting
-hotarea_size=10
-enable_hotarea=1
-ov_tab_mode=0
-overviewgappi=5
-overviewgappo=30
-
-# Misc
-no_border_when_single=0
-axis_bind_apply_timeout=100
-focus_on_activate=1
-inhibit_regardless_of_visibility=0
-sloppyfocus=1
-warpcursor=1
-focus_cross_monitor=0
-focus_cross_tag=0
-enable_floating_snap=0
-snap_distance=30
-cursor_size=24
-drag_tile_to_tile=1
-
-# keyboard
-repeat_rate=25
-repeat_delay=600
-numlockon=1
-xkb_rules_layout=us
-
-# Trackpad
-# need relogin to make it apply
-disable_trackpad=0
-tap_to_click=0
-tap_and_drag=1
-drag_lock=1
-trackpad_natural_scrolling=0
-disable_while_typing=1
-left_handed=0
-middle_button_emulation=0
-swipe_min_threshold=1
-
-# mouse
-# need relogin to make it apply
-mouse_natural_scrolling=0
-
-# Appearance
-gappih=5
-gappiv=5
-gappoh=10
-gappov=10
-scratchpad_width_ratio=0.8
-scratchpad_height_ratio=0.9
-borderpx=2
-rootcolor=0x201b14ff
-bordercolor=0x444444ff
-focuscolor=0xc9b890ff
-maxmizescreencolor=0x89aa61ff
-urgentcolor=0xad401fff
-scratchpadcolor=0x516c93ff
-globalcolor=0xb153a7ff
-overlaycolor=0x14a57cff
-
-# layout support:
-# tile,scroller,grid,deck,monocle,center_tile,vertical_tile,vertical_scroller
-tagrule=id:1,layout_name:tile
-tagrule=id:2,layout_name:tile
-tagrule=id:3,layout_name:tile
-tagrule=id:4,layout_name:tile
-tagrule=id:5,layout_name:tile
-tagrule=id:6,layout_name:tile
-tagrule=id:7,layout_name:tile
-tagrule=id:8,layout_name:tile
-tagrule=id:9,layout_name:tile
-
-# Key Bindings
-# key name refer to `xev` or `wev` command output,
-# mod keys name: super,ctrl,alt,shift,none
-bind=SUPER,period,incnmaster,+1
-bind=SUPER,comma,incnmaster,-1
-
-# reload config
-bind=SUPER,c,reload_config
-bind=SUPER,c,spawn_shell, notify-send 'Reloading Config!'
-
-# menu and terminal
-bind=SUPER,d,spawn,wofi --show drun -GI
-bind=SUPER,Return,spawn,kitty 
-
-# exit
-bind=SUPER+SHIFT,m,quit
-bind=SUPER,m,spawn_shell, playerctl pause; swaylock -f -c 000000 # lock
-
-bind=SUPER+SHIFT,q,killclient,
-
-# switch window focus
-#bind=SUPER,Tab,focusstack,next
-#bind=ALT,Left,focusdir,left
-#bind=ALT,Right,focusdir,right
-#bind=ALT,Up,focusdir,up
-#bind=ALT,Down,focusdir,down
-
-bind=SUPER,j,focusstack,next
-bind=SUPER,k,focusstack,prev
-bind=SUPER,h,focusdir,left
-bind=SUPER,l,focusdir,right
-
-# swap window
-bind=SUPER+SHIFT,k,exchange_client,up
-bind=SUPER+SHIFT,j,exchange_client,down
-bind=SUPER+SHIFT,h,exchange_client,left
-bind=SUPER+SHIFT,l,exchange_client,right
-
-# switch window status
-bind=SUPER,g,toggleglobal,
-bind=ALT,Tab,toggleoverview,
-bind=SUPER+SHIFT,space,togglefloating,
-#bind=ALT,a,togglemaxmizescreen,
-bind=SUPER,f,togglefullscreen,
-#bind=ALT+SHIFT,f,togglefakefullscreen,
-#
-#
-# Go through all the bookmarks
-bind=SUPER,i,toggle_scratchpad,
-bind=SUPER+SHIFT,i,minimized,
-#bind=SUPER,o,toggleoverlay,
-#bind=SUPER+SHIFT,I,restore_minimized
-
-# scroller layout
-bind=ALT,e,set_proportion,1.0
-bind=ALT,x,switch_proportion_preset,
-
-# switcnext
-bind=SUPER,n,switch_layout
-
-# Layouts
-bind=SUPER,t,setlayout,tile
-bind=SUPER,v,setlayout,vertical_grid
-bind=SUPER,c,setlayout,spiral
-bind=SUPER,s,setlayout,scroller
-bind=SUPER,a,togglegaps
-
-# tag switch
-bind=SUPER,1,comboview,1,0
-bind=SUPER,2,comboview,2,0
-bind=SUPER,3,comboview,3,0
-bind=SUPER,4,comboview,4,0
-bind=SUPER,5,comboview,5,0
-bind=SUPER,6,comboview,6,0
-bind=SUPER,7,comboview,7,0
-bind=SUPER,8,comboview,8,0
-bind=SUPER,9,comboview,9,0
-bind=SUPER,0,comboview,0,0
-
-# tag: move client to the tag and focus it
-# tagsilent: move client to the tag and not focus it
-# bind=Alt,1,tagsilent,1
-bind=SUPER+SHIFT,1,tagsilent,1,0
-bind=SUPER+SHIFT,2,tagsilent,2,0
-bind=SUPER+SHIFT,3,tagsilent,3,0
-bind=SUPER+SHIFT,4,tagsilent,4,0
-bind=SUPER+SHIFT,5,tagsilent,5,0
-bind=SUPER+SHIFT,6,tagsilent,6,0
-bind=SUPER+SHIFT,7,tagsilent,7,0
-bind=SUPER+SHIFT,8,tagsilent,8,0
-bind=SUPER+SHIFT,9,tagsilent,9,0
-bind=SUPER+SHIFT,0,tagsilent,0,0
-
-# monitor switch
-bind=alt+shift,Left,focusmon,left
-bind=alt+shift,Right,focusmon,right
-bind=SUPER+Alt,Left,tagmon,left
-bind=SUPER+Alt,Right,tagmon,right
-
-# gaps
-bind=ALT+SHIFT,X,incgaps,1
-bind=ALT+SHIFT,Z,incgaps,-1
-bind=ALT+SHIFT,R,togglegaps
-
-# movewin
-bind=CTRL+SHIFT,Up,movewin,+0,-50
-bind=CTRL+SHIFT,Down,movewin,+0,+50
-bind=CTRL+SHIFT,Left,movewin,-50,+0
-bind=CTRL+SHIFT,Right,movewin,+50,+0
-
-# resizewin
-bind=SUPER,Up,resizewin,+0,-50
-bind=SUPER,Down,resizewin,+0,+50
-bind=SUPER,Left,resizewin,-50,+0
-bind=SUPER,Right,resizewin,+50,+0
-
-# Mouse Button Bindings
-# NONE mode key only work in ov mode
-mousebind=SUPER,btn_left,moveresize,curmove
-mousebind=SUPER,btn_right,moveresize,curresize
-
-#mousebind=NONE,btn_middle,togglemaxmizescreen,0
-#mousebind=NONE,btn_left,toggleoverview,-1
-#mousebind=NONE,btn_right,killclient,0
-
-# Axis Bindings
-#axisbind=SUPER,UP,viewtoleft_have_client
-#axisbind=SUPER,DOWN,viewtoright_have_client
-
-
-# layer rule
-layerrule=animation_type_open:zoom,layer_name:wofi
-layerrule=animation_type_close:zoom,layer_name:wofi
-
-# Volume control
-bind=none,XF86AudioRaiseVolume,spawn_shell,pactl set-sink-volume @DEFAULT_SINK@ +5% && pkill -RTMIN+10 i3blocks;,
-bind=none,XF86AudioLowerVolume,spawn_shell,pactl set-sink-volume @DEFAULT_SINK@ -5% && pkill -RTMIN+10 i3blocks;,
-bind=none,XF86AudioMute,spawn_shell,pactl set-sink-mute @DEFAULT_SINK@ toggle && pkill -RTMIN+10 i3blocks;,
-bind=none,XF86AudioMicMute,spwan_shell,pactl set-source-mute @DEFAULT_SOURCE@ toggle;,
-
-bind=SUPER,bracketleft,spawn_shell,playerctl previous
-bind=SUPER,bracketright,spawn_shell,playerctl next
-
-# Brightness Control
-bind=none,XF86MonBrightnessDown,spawn_shell,brightnessctl set 2%-
-bind=none,XF86MonBrightnessUp,spawn_shell,brightnessctl set 2%+
-bind=SUPER+SHIFT,p, spawn_shell, slurp | grim -g - - | tee ~/Pictures/$(date +%F-%s).png | wl-copy 

.config/mango/waybar/config.jsonc

@@ -1,251 +0,0 @@
-// -*- mode: jsonc -*-
-{
-    // "layer": "top", // Waybar at top layer
-    // "position": "bottom", // Waybar position (top|bottom|left|right)
-    //"height": 10, // Waybar height (to be removed for auto height)
-    // "width": 1280, // Waybar width
-    "spacing": 6, // Gaps between modules (4px)
-    // Choose the order of the modules
-    "modules-left": [
-        "ext/workspaces",
-        "dwl/window",
-        "sway/mode",
-        "sway/scratchpad",
-        "custom/media"
-    ],
-    //"modules-center": [
-        //"sway/window"
-    //],
-    "modules-right": [
-        "mpd",
-        "custom/audio_idle_inhibitor",
-        "pulseaudio",
-        "network",
-        //"power-profiles-daemon",
-        //"cpu",
-        //"memory",
-        //"temperature",
-        //"backlight",
-        //"keyboard-state",
-        //"sway/language",
-        "battery",
-        //"battery#bat2",
-        "clock",
-        "tray"
-        //"custom/power"
-    ],
-    "ext/workspaces": {
-        "format": "{icon}",
-        "ignore-hidden": true,
-        "on-click": "activate",
-        "on-click-right": "deactivate",
-        "sort-by-id": true,
-    },
-    "dwl/tags": {
-        "num-tags":9,
-    },
-    "dwl/window": {
-        //"format": "[{layout}]{title}"
-        "format": "[{layout}]"
-    },
-    // Modules configuration
-    // "sway/workspaces": {
-    //     "disable-scroll": true,
-    //     "all-outputs": true,
-    //     "warp-on-scroll": false,
-    //     "format": "{name}: {icon}",
-    //     "format-icons": {
-    //         "1": "",
-    //         "2": "",
-    //         "3": "",
-    //         "4": "",
-    //         "5": "",
-    //         "urgent": "",
-    //         "focused": "",
-    //         "default": ""
-    //     }
-    // },
-    "keyboard-state": {
-        "numlock": true,
-        "capslock": true,
-        "format": "{name} {icon}",
-        "format-icons": {
-            "locked": "",
-            "unlocked": ""
-        }
-    },
-    "sway/mode": {
-        "format": "<span style=\"italic\">{}</span>"
-    },
-    "sway/scratchpad": {
-        "format": "{icon} {count}",
-        "show-empty": false,
-        "format-icons": ["", ""],
-        "tooltip": true,
-        "tooltip-format": "{app}: {title}"
-    },
-    "mpd": {
-        "format": "{stateIcon} {consumeIcon}{randomIcon}{repeatIcon}{singleIcon}{artist} - {title} ⸨{songPosition}|{queueLength}⸩% ",
-				"format-alt": "{stateIcon} {consumeIcon}{randomIcon}{repeatIcon}{singleIcon}{artist} - {album} - {title} ({elapsedTime:%M:%S}/{totalTime:%M:%S}) ⸨{songPosition}|{queueLength}⸩% ",
-        "format-disconnected": "Disconnected ",
-        //"format-stopped": "{consumeIcon}{randomIcon}{repeatIcon}{singleIcon}Stopped ",
-        "format-stopped": "",
-        //"unknown-tag": "N/A",
-        "unknown-tag": "",
-        "interval": 5,
-        "consume-icons": {
-            "on": " "
-        },
-        "random-icons": {
-            "off": "<span color=\"#f53c3c\"></span> ",
-            "on": " "
-        },
-        "repeat-icons": {
-            "on": " "
-        },
-        "single-icons": {
-            "on": "1 "
-        },
-        "state-icons": {
-            "paused": "",
-            "playing": ""
-        },
-        "tooltip-format": "MPD (connected)",
-        "tooltip-format-disconnected": "MPD (disconnected)"
-    },
-    "idle_inhibitor": {
-        "format": "{icon}",
-        "format-icons": {
-            "activated": "",
-            "deactivated": ""
-        }
-    },
-    "tray": {
-        // "icon-size": 21,
-        "spacing": 10,
-        // "icons": {
-        //   "blueman": "bluetooth",
-        //   "TelegramDesktop": "$HOME/.local/share/icons/hicolor/16x16/apps/telegram.png"
-        // }
-    },
-    "clock": {
-        //"timezone": "America/Los_Angeles",
-        "tooltip-format": "<big>{:%Y %B}</big>\n<tt><small>{calendar}</small></tt>",
-				"format": "{:%r %Y-%m-%d}",
-				//"format": "{:%R %p  %Y-%m-%d}",
-        //"format-alt": "{:%Y-%m-%d}"
-    },
-    "cpu": {
-        "format": "{usage}% ",
-        "tooltip": false
-    },
-    "memory": {
-        "format": "{}% "
-    },
-    "temperature": {
-        // "thermal-zone": 2,
-        // "hwmon-path": "/sys/class/hwmon/hwmon2/temp1_input",
-        "critical-threshold": 80,
-        // "format-critical": "{temperatureC}°C {icon}",
-        "format": "{temperatureC}°C {icon}",
-        "format-icons": ["", "", ""]
-    },
-    "backlight": {
-        // "device": "acpi_video1",
-        "format": "{percent}% {icon}",
-        "format-icons": ["", "", "", "", "", "", "", "", ""]
-    },
-    "battery": {
-        "states": {
-            // "good": 95,
-            "warning": 30,
-            "critical": 15
-        },
-				"format": "{time} {capacity}% {icon}",
-        "format-full": "{capacity}% {icon}",
-        "format-charging": "{capacity}% C",
-        "format-plugged": "{capacity}% P",
-        "format-alt": "{time} {icon}",
-        // "format-good": "", // An empty format will hide the module
-        // "format-full": "",
-        "format-icons": ["", "", "", "", ""]
-    },
-    "battery#bat2": {
-        "bat": "BAT2"
-    },
-    "power-profiles-daemon": {
-      "format": "{icon}",
-      "tooltip-format": "Power profile: {profile}\nDriver: {driver}",
-      "tooltip": true,
-      "format-icons": {
-        "default": "",
-        "performance": "",
-        "balanced": "",
-        "power-saver": ""
-      }
-    },
-    "network": {
-        // "interface": "wlp2*", // (Optional) To force the use of this interface
-        "format-wifi": "{essid} ({signalStrength}%) ",
-        "format-ethernet": "{ipaddr}/{cidr} ",
-        "tooltip-format": "{ifname} via {gwaddr} ",
-        "format-linked": "{ifname} (No IP) ",
-        "format-disconnected": "Disconnected ⚠",
-        "format-alt": "{ifname}: {ipaddr}/{cidr}"
-    },
-    "pulseaudio": {
-        // "scroll-step": 1, // %, can be a float
-        "format": "{volume}% {icon} {format_source}",
-        "format-bluetooth": "{volume}% {icon}  {format_source}",
-        "format-bluetooth-muted": " {icon} {format_source}",
-        "format-muted": " {format_source}",
-        "format-source": "{volume}% ",
-        "format-source-muted": "",
-        "format-icons": {
-            "headphone": "",
-            "hands-free": "",
-            "headset": "",
-            "phone": "",
-            "portable": "",
-            "car": "",
-            "default": ["", "", ""]
-        },
-        "on-click": "pavucontrol"
-    },
-    "custom/media": {
-        "format": "{icon} {text}",
-        "return-type": "json",
-        "max-length": 40,
-        "format-icons": {
-            "spotify": "",
-            "default": "🎜"
-        },
-        "escape": true,
-        "exec": "$HOME/.config/waybar/mediaplayer.py 2> /dev/null" // Script in resources folder
-        // "exec": "$HOME/.config/waybar/mediaplayer.py --player spotify 2> /dev/null" // Filter player based on name
-    },
-    "custom/power": {
-        "format" : "⏻ ",
-		"tooltip": false,
-		"menu": "on-click",
-		"menu-file": "$HOME/.config/waybar/power_menu.xml", // Menu file in resources folder
-		"menu-actions": {
-			"shutdown": "shutdown",
-			"reboot": "reboot",
-			"suspend": "systemctl suspend",
-			"hibernate": "systemctl hibernate"
-		}
-    },
-		"custom/audio_idle_inhibitor": {
-		"format": "{icon} ",
-		"exec": "sway-audio-idle-inhibit --dry-print-both-waybar",
-		"exec-if": "which sway-audio-idle-inhibit",
-		"return-type": "json",
-		"format-icons": {
-			"output": "",
-			"input": "",
-			"output-input": "  ",
-			"none": ""
-		}
-	}
-}

.config/mango/waybar/style.css

@@ -1,405 +0,0 @@
-* {
-    /* `otf-font-awesome` is required to be installed for icons */
-    /*font-family: FontAwesome, Roboto, Helvetica, Arial, sans-serif; */
-	font-family: "JetBrainsMono NF";
-    font-size: 13px;
-}
-
-window#waybar {
-    /*background-color: rgba(43, 48, 59, 0.5);
-    border-bottom: 3px solid rgba(100, 114, 125, 0.5); */
-    background-color: rgba(0, 0, 0, 1);
-    color: #ffffff;
-    transition-property: background-color;
-    transition-duration: .5s;
-}
-
-window#waybar.hidden {
-    opacity: 0.2;
-}
-
-window#waybar.empty {
-    /*background-color: transparent;*/
-}
-window#waybar.solo {
-    /*background-color: #FFFFFF;*/
-}
-
-window#waybar.termite {
-    background-color: #3F3F3F;
-}
-
-window#waybar.chromium {
-    background-color: #000000;
-    border: none;
-}
-
-button {
-    /* Use box-shadow instead of border so the text isn't offset */
-    box-shadow: inset 0 -3px transparent;
-    /* Avoid rounded borders under each button name */
-    border: none;
-    border-radius: 0;
-}
-
-/* https://github.com/Alexays/Waybar/wiki/FAQ#the-workspace-buttons-have-a-strange-hover-effect */
-button:hover {
-    background: inherit;
-    box-shadow: inset 0 -3px #ffffff;
-}
-
-/* you can set a style on hover for any module like this */
-#pulseaudio:hover {
-    /*background-color: #a37800;*/
-}
-
-#workspaces button {
-    padding: 0 5px;
-    background-color: transparent;
-    color: #ffffff;
-}
-
-#workspaces button:hover {
-    background: rgba(0, 0, 0, 0.2);
-}
-
-#workspaces button.focused {
-    background-color: #64727D;
-    box-shadow: inset 0 -3px #ffffff;
-}
-
-#workspaces button.urgent {
-    background-color: #eb4d4b;
-}
-
-#mode {
-    background-color: #64727D;
-    box-shadow: inset 0 -3px #ffffff;
-}
-
-#clock,
-#battery,
-#cpu,
-#memory,
-#disk,
-#temperature,
-#backlight,
-#network,
-#pulseaudio,
-#wireplumber,
-#custom-media,
-#tray,
-#mode,
-#idle_inhibitor,
-#scratchpad,
-#power-profiles-daemon,
-#mpd {
-    padding: 0 10px;
-    color: #ffffff;
-}
-
-#window,
-#workspaces {
-    margin: 0 4px;
-}
-
-/* If workspaces is the leftmost module, omit left margin */
-.modules-left > widget:first-child > #workspaces {
-    margin-left: 0;
-}
-
-/* If workspaces is the rightmost module, omit right margin */
-.modules-right > widget:last-child > #workspaces {
-    margin-right: 0;
-}
-
-#clock {
-   /* background-color: #64727D;*/
-}
-
-#battery {
-    /*background-color: #ffffff;
-    color: #000000;*/
-}
-
-#battery.charging, #battery.plugged {
-    /*color: #ffffff;
-    background-color: #26A65B;*/
-}
-
-@keyframes blink {
-    to {
-        background-color: #ffffff;
-        color: #000000;
-    }
-}
-
-/* Using steps() instead of linear as a timing function to limit cpu usage */
-#battery.critical:not(.charging) {
-    background-color: #f53c3c;
-    color: #ffffff;
-    animation-name: blink;
-    animation-duration: 0.5s;
-    animation-timing-function: steps(12);
-    animation-iteration-count: infinite;
-    animation-direction: alternate;
-}
-
-#power-profiles-daemon {
-    padding-right: 15px;
-}
-
-#power-profiles-daemon.performance {
-    background-color: #f53c3c;
-    color: #ffffff;
-}
-
-#power-profiles-daemon.balanced {
-    background-color: #2980b9;
-    color: #ffffff;
-}
-
-#power-profiles-daemon.power-saver {
-    background-color: #2ecc71;
-    color: #000000;
-}
-
-label:focus {
-    background-color: #000000;
-}
-
-#cpu {
-    background-color: #2ecc71;
-    color: #000000;
-}
-
-#memory {
-    background-color: #9b59b6;
-}
-
-#disk {
-    background-color: #964B00;
-}
-
-#backlight {
-    background-color: #90b1b1;
-}
-
-#network {
-    /*background-color: #2980b9;*/
-}
-
-#network.disconnected {
-    /*background-color: #f53c3c;*/
-}
-
-#pulseaudio {
-    /*background-color: #f1c40f;*/
-    /*color: #000000;*/
-}
-
-#pulseaudio.muted {
-    /*background-color: #90b1b1;*/
-    /*color: #2a5c45;*/
-}
-
-#wireplumber {
-    background-color: #fff0f5;
-    color: #000000;
-}
-
-#wireplumber.muted {
-    background-color: #f53c3c;
-}
-
-#custom-media {
-    background-color: #66cc99;
-    color: #2a5c45;
-    min-width: 100px;
-}
-
-#custom-media.custom-spotify {
-    background-color: #66cc99;
-}
-
-#custom-media.custom-vlc {
-    background-color: #ffa000;
-}
-
-#temperature {
-    background-color: #f0932b;
-}
-
-#temperature.critical {
-    background-color: #eb4d4b;
-}
-
-#tray {
-    /*background-color: #2980b9;*/
-}
-
-#tray > .passive {
-    -gtk-icon-effect: dim;
-}
-
-#tray > .needs-attention {
-    -gtk-icon-effect: highlight;
-    background-color: #eb4d4b;
-}
-
-#idle_inhibitor {
-    background-color: #2d3436;
-}
-
-#idle_inhibitor.activated {
-    background-color: #ecf0f1;
-    color: #2d3436;
-}
-
-#mpd {
-    background-color: #66cc99;
-    color: #2a5c45;
-}
-
-#mpd.disconnected {
-    background-color: #f53c3c;
-}
-
-#mpd.stopped {
-    background-color: #90b1b1;
-}
-
-#mpd.paused {
-    background-color: #51a37a;
-}
-
-#language {
-    background: #00b093;
-    color: #740864;
-    padding: 0 5px;
-    margin: 0 5px;
-    min-width: 16px;
-}
-
-#keyboard-state {
-    background: #97e1ad;
-    color: #000000;
-    padding: 0 0px;
-    margin: 0 5px;
-    min-width: 16px;
-}
-
-#keyboard-state > label {
-    padding: 0 5px;
-}
-
-#keyboard-state > label.locked {
-    background: rgba(0, 0, 0, 0.2);
-}
-
-#scratchpad {
-    background: rgba(0, 0, 0, 0.2);
-}
-
-#scratchpad.empty {
-	background-color: transparent;
-}
-
-#privacy {
-    padding: 0;
-}
-
-#privacy-item {
-    padding: 0 5px;
-    color: white;
-}
-
-#privacy-item.screenshare {
-    background-color: #cf5700;
-}
-
-#privacy-item.audio-in {
-    background-color: #1ca000;
-}
-
-#privacy-item.audio-out {
-    background-color: #0069d4;
-}
-
-/*MANGO WORKSPACES */
-#workspaces {
-  border-style: solid;
-  border-color: #c9b890;
-
-}
-
-#workspaces button {
-  border: none;
-  background: none;
-  box-shadow: inherit;
-  text-shadow: inherit;
-  color: #ddca9e;
-}
-
-#workspaces button.hidden {
-  color: #9e906f;
-
-  background-color: transparent;
-}
-
-#workspaces button.visible {
-  color: #ddca9e;
-}
-
-#workspaces button:hover {
-  color: #d79921;
-}
-
-#workspaces button.active {
-  background-color: #ddca9e;
-  color: #282828;
-}
-
-#workspaces button.urgent {
-  background-color: #ef5e5e;
-  color: #282828;
-}
-
-#tags {
-  background-color: transparent;
-}
-
-#tags button {
-  color: #a585cd;
-}
-
-#tags button:not(.occupied):not(.focused) {
-  font-size: 0;
-  min-width: 0;
-  min-height: 0;
-  margin: -17px;
-  padding: 0;
-  color: transparent;
-  background-color: transparent;
-}
-
-#tags button.occupied {
-  background-color: #fff;
-  color: #cdc885;
-}
-
-#tags button.focused {
-  background-color: rgb(186, 142, 213);
-  color: #fff;
-}
-
-#tags button.urgent {
-  background: rgb(171, 101, 101);
-  color: #fff;
-}
-/*
-#window {
-  background-color: rgb(237, 196, 147);
-  color: rgb(63, 37, 5);
-}
-*/

.config/nvim/init.lua

@@ -2,7 +2,7 @@ require("config.lazy")
 
 -- colorscheme
 vim.o.termguicolors = true
-vim.opt.winborder = 'rounded'
+--vim.opt.winborder = 'rounded'
 --vim.o.background = "dark" -- or "light" for light mode
 --vim.cmd("colorscheme gruvbox ")
 --vim.cmd("colorscheme retrobox")

.config/nvim/lazy-lock.json

@@ -1,14 +1,14 @@
 {
   "black-metal-theme-neovim": { "branch": "main", "commit": "6d0207871387077f40d5396ab1ae90520e688d36" },
-  "claude-code.nvim": { "branch": "main", "commit": "55c0cb59828fbc3bec744288286a46f5d5750b83" },
+  "harpoon": { "branch": "master", "commit": "1bc17e3e42ea3c46b33c0bbad6a880792692a1b3" },
   "lazy.nvim": { "branch": "main", "commit": "306a05526ada86a7b30af95c5cc81ffba93fef97" },
-  "mason-lspconfig.nvim": { "branch": "main", "commit": "3d89e7c92fbd96c5e10e0298fc2b006f21cf9428" },
+  "mason-lspconfig.nvim": { "branch": "main", "commit": "80c0130c5f16b551865a69e832f1feadeedb5fbe" },
   "mason.nvim": { "branch": "main", "commit": "44d1e90e1f66e077268191e3ee9d2ac97cc18e65" },
   "mini.completion": { "branch": "main", "commit": "4d451f82f193f6751719935a63d16ccb79a76e0b" },
-  "mini.nvim": { "branch": "main", "commit": "9b935c218ddba02e5dc75c94f90143bce1f7c646" },
+  "mini.nvim": { "branch": "main", "commit": "8dccba88fc4dce006ca0ad668067c9e0d5ce7702" },
-  "nvim-lspconfig": { "branch": "master", "commit": "79c9a15be5731bc8694840a8fb0c9141c20a80c0" },
+  "nvim-lspconfig": { "branch": "master", "commit": "92ee7d42320edfbb81f3cad851314ab197fa324a" },
   "nvim-treesitter": { "branch": "master", "commit": "42fc28ba918343ebfd5565147a42a26580579482" },
   "plenary.nvim": { "branch": "master", "commit": "b9fd5226c2f76c951fc8ed5923d85e4de065e509" },
   "telescope.nvim": { "branch": "master", "commit": "84b9ba066d1860f7a586ce9cd732fd6c4f77d1d9" },
-  "vim-tmux-navigator": { "branch": "master", "commit": "e41c431a0c7b7388ae7ba341f01a0d217eb3a432" }
+  "vim-tmux-navigator": { "branch": "master", "commit": "c45243dc1f32ac6bcf6068e5300f3b2b237e576a" }
 }

.config/nvim/lua/plugins/claude.lua

@@ -1,11 +0,0 @@
-return {
-  "greggh/claude-code.nvim",
-  dependencies = {
-    "nvim-lua/plenary.nvim", -- Required for git operations
-  },
-  config = function()
-    require("claude-code").setup({
-          command = "ollama launch --model gpt-oss:latest",
-    })
-  end
-}

.config/nvim/lua/plugins/harpoon.lua

@@ -0,0 +1,23 @@
+return {
+    'ThePrimeagen/harpoon',
+    config = function(_, opts)
+        require('harpoon').setup(opts)
+        local mark = require('harpoon'.. ".mark")
+        local ui = require('harpoon'.. ".ui")
+
+        -- Harpoon marked files 1 through 4.
+        vim.keymap.set("n", "<a-1>", function() ui.nav_file(1) end)
+        vim.keymap.set("n", "<a-2>", function() ui.nav_file(2) end)
+        vim.keymap.set("n", "<a-3>", function() ui.nav_file(3) end)
+        vim.keymap.set("n", "<a-4>", function() ui.nav_file(4) end)
+
+        -- Harpoon next and previous.
+        vim.keymap.set("n", "<a-n>", function() ui.nav_next() end)
+        vim.keymap.set("n", "<a-p>", function() ui.nav_prev() end)
+
+        -- Harpoon user interface.
+        vim.keymap.set("n", "<leader>hq", ui.toggle_quick_menu)
+        vim.keymap.set("n", "<leader>ha", mark.add_file)
+
+    end
+}

.config/nvim/lua/plugins/mason.lua

@@ -16,7 +16,7 @@ return {
 		-- Autocompletion
 		---
 
-		--require('mini.snippets').setup()
+		require('mini.snippets').setup()
 		require('mini.completion').setup()
 
 		---

.config/nvim/settings.vim

@@ -0,0 +1,65 @@
+set nocompatible
+syntax on
+filetype plugin on
+set autoread  " Set to auto read when a file is changed from the outside
+
+set path+=** 
+set wildmenu
+set showcmd
+set wildmode=longest:full,full
+set wildoptions=pum
+set wildignore+=*/tmp/*,*.so,*.swp,*.zip
+set wildignore+=*\\tmp\\*,*.exe
+
+set number
+set number ruler
+set showmatch
+set ruler
+set wrap
+set showbreak=↳\ \
+set textwidth=79
+set hidden
+set backspace=indent,eol,start
+set hlsearch
+set noswapfile
+set mouse= "remove mouse
+set clipboard=unnamedplus
+
+" Rendering
+set ttyfast
+set laststatus=1
+set t_Co=256
+set background=dark
+
+set colorcolumn=81
+hi ColorColumn ctermbg=lightgrey guibg=lightgrey
+
+" Show bad whitespace in an obvious but not obnoxious color
+highlight pythonSpaceError ctermbg=darkgreen guibg=darkgreen
+highlight BadWhitespace ctermbg=darkgreen guibg=darkgreen
+au BufNewFile,BufRead *.py,*.pyw,*.c,*.h,*.cc,*.hh,*.sh match BadWhitespace /\s\+$/
+
+" File settings
+au FileType *
+	\ set tabstop=2
+	\     softtabstop=2
+	\     shiftwidth=2
+	\     textwidth=79
+	\     autoindent
+	\     smartindent
+
+"Python Specific Config
+au FileType python
+\     set fileformat=unix
+\     tabstop=4
+\     softtabstop=4
+\     shiftwidth=4
+\     encoding=utf-8
+
+au FileType markdown
+			\ set spell spelllang=en_us
+			\			tabstop=4
+			\     softtabstop=4
+			\     shiftwidth=4
+
+

.config/sway/config

@@ -1,50 +1,254 @@
-font 'JetBrainsMono' 10
+# Default config for sway
+#
+# Copy this to ~/.config/sway/config and edit it to your liking.
+#
+# Read `man 5 sway` for a complete reference.
 
+font 'JetBrainsMono NF' 9
 ### Variables
-#set $mod Mod1
+#
+# Logo key. Use Mod1 for Alt.
 set $mod Mod4
-
+#set $mod Mod1
-set $term kitty 
+# Home row direction keys, like vim
-#set $term ghostty
-
-set $menu wofi -S drun -GI
-
 set $left h
 set $down j
 set $up k
 set $right l
+# Your preferred terminal emulator
+set $term kitty
+# Your preferred application launcher
+# Note: pass the final command to swaymsg so that the resulting window can be opened
+# on the original workspace that the command was run on.
+set $menu wofi -dGS drun
+
+include /etc/sway/config-vars.d/*
+
+### Output configuration
+#
+# Default wallpaper (more resolutions are available in /usr/share/backgrounds/sway/)
+output * bg #000000 solid_color
+
+# Example configuration:
+#
+
+output * scale 1.3
+
+set $laptop eDP-1
+output $laptop scale 1.3
+#bindswitch --reload --locked lid:on output $laptop disable
+#bindswitch --reload --locked lid:off output $laptop enable
+#exec_always 'if grep -q open /proc/acpi/button/lid/LID0/state; then swaymsg output eDP-1 enable; else swaymsg output eDP-1 disable; fi'
+#exec_always '/home/jozamudi/.config/sway/scripts/clamshell-mode.sh'
 
 
-include ~/.config/sway/config.d/*
+# You can get the names of your outputs by running: swaymsg -t get_outputs
 
 ### Idle configuration
-#exec swayidle -w \
+#
-#	timeout 300 'swaylock -f -c 000000' \
+# Example configuration:
-#	timeout 600 'swaymsg "output * power off"' resume 'swaymsg "output * power on"' \
-#	before-sleep 'playerctl pause; swaylock -f -c 000000'
 
-output HDMI-A-3 mode 3440x1440
+exec swayidle -w \
+				timeout 300 'swaylock -f -c 000000' \
+				timeout 600 'swaymsg "output * dpms off"' resume 'swaymsg "output * dpms on"' \
+				before-sleep 'swaylock -f -c 000000'
 
-#seat seat0 xcursor_theme Adwaita 25 
+#
+# This will lock your screen after 300 seconds of inactivity, then turn off
+# your displays after another 300 seconds, and turn your screens back on when
+# resumed. It will also lock your screen before your computer goes to sleep.
 
-# Auto start .desktop files using dex
+### Input configuration
-exec dex -a
+#
-#exec nohup pipewire
+# Example configuration:
-exec nohup swaync
+#
-exec nohup sway-audio-idle-inhibit
+#   input "2:14:SynPS/2_Synaptics_TouchPad" {
-exec nohup waybar 
+#       dwt enabled
-exec nohup nm-applet
+#       tap enabled
-exec nohup shikane
+#       natural_scroll enabled
-exec nohup flatpak run com.github.wwmm.easyeffects -w
+#       middle_emulation enabled
+#   }
+#
+# You can get the names of your inputs by running: swaymsg -t get_inputs
+# Read `man 5 sway-input` for more information about this section.
 
-exec wl-paste -t text --watch clipman store --no-persist
+### Key bindings
-exec dbus-update-activation-environment --systemd WAYLAND_DISPLAY XDG_CURRENT_DESKTOP=wlroots DISPLAY
+# Sound:
-exec /usr/lib/xdg-desktop-portal-wlr 
+#	bindsym XF86AudioMute exec pactl set-sink-mute @DEFAULT_SINK@ toggle
-exec systemctl --user start shikane &
+#	bindsym XF86AudioRaiseVolume exec pactl set-sink-volume @DEFAULT_SINK@ +5%
-exec systemctl --user start sway-audio-idle-inhibit &
+#	bindsym XF86AudioLowerVolume exec pactl set-sink-volume @DEFAULT_SINK@ -5%
-exec wl-clip-persist --clipboard regular --reconnect-tries 0 &
+#
-exec wl-paste --type text --watch cliphist store & 
+# Basics:
+#
+    # Start a terminal
+    bindsym $mod+Return exec $term
 
-default_border pixel 2
+    # Kill focused window
-default_floating_border pixel 2
+    bindsym $mod+Shift+q kill
 
+    # Start your launcher
+    bindsym $mod+d exec $menu
+
+    # Drag floating windows by holding down $mod and left mouse button.
+    # Resize them with right mouse button + $mod.
+    # Despite the name, also works for non-floating windows.
+    # Change normal to inverse to use left mouse button for resizing and right
+    # mouse button for dragging.
+    floating_modifier $mod normal
+
+    # Reload the configuration file
+    bindsym $mod+Shift+c reload
+
+    # Exit sway (logs you out of your Wayland session)
+    bindsym $mod+Shift+e exec swaynag -t warning -m 'You pressed the exit shortcut. Do you really want to exit sway? This will end your Wayland session.' -B 'Yes, exit sway' 'swaymsg exit'
+#
+# Moving around:
+#
+    # Move your focus around
+    bindsym $mod+$left focus left
+    bindsym $mod+$down focus down
+    bindsym $mod+$up focus up
+    bindsym $mod+$right focus right
+    # Or use $mod+[up|down|left|right]
+    bindsym $mod+Left focus left
+    bindsym $mod+Down focus down
+    bindsym $mod+Up focus up
+    bindsym $mod+Right focus right
+
+    # Move the focused window with the same, but add Shift
+    bindsym $mod+Shift+$left move left
+    bindsym $mod+Shift+$down move down
+    bindsym $mod+Shift+$up move up
+    bindsym $mod+Shift+$right move right
+    # Ditto, with arrow keys
+    bindsym $mod+Shift+Left move left
+    bindsym $mod+Shift+Down move down
+    bindsym $mod+Shift+Up move up
+    bindsym $mod+Shift+Right move right
+#
+# Workspaces:
+#
+    # Switch to workspace
+    bindsym $mod+1 workspace number 1
+    bindsym $mod+2 workspace number 2
+    bindsym $mod+3 workspace number 3
+    bindsym $mod+4 workspace number 4
+    bindsym $mod+5 workspace number 5
+    bindsym $mod+6 workspace number 6
+    bindsym $mod+7 workspace number 7
+    bindsym $mod+8 workspace number 8
+    bindsym $mod+9 workspace number 9
+    bindsym $mod+0 workspace number 10
+    # Move focused container to workspace
+    bindsym $mod+Shift+1 move container to workspace number 1
+    bindsym $mod+Shift+2 move container to workspace number 2
+    bindsym $mod+Shift+3 move container to workspace number 3
+    bindsym $mod+Shift+4 move container to workspace number 4
+    bindsym $mod+Shift+5 move container to workspace number 5
+    bindsym $mod+Shift+6 move container to workspace number 6
+    bindsym $mod+Shift+7 move container to workspace number 7
+    bindsym $mod+Shift+8 move container to workspace number 8
+    bindsym $mod+Shift+9 move container to workspace number 9
+    bindsym $mod+Shift+0 move container to workspace number 10
+    # Note: workspaces can have any name you want, not just numbers.
+    # We just use 1-10 as the default.
+#
+# Layout stuff:
+#
+    # You can "split" the current object of your focus with
+    # $mod+b or $mod+v, for horizontal and vertical splits
+    # respectively.
+    bindsym $mod+b splith
+    bindsym $mod+v splitv
+
+    # Switch the current container between different layout styles
+    bindsym $mod+s layout stacking
+    bindsym $mod+w layout tabbed
+    bindsym $mod+e layout toggle split
+
+    # Make the current focus fullscreen
+    bindsym $mod+f fullscreen
+
+    # Toggle the current focus between tiling and floating mode
+    bindsym $mod+Shift+space floating toggle
+
+    # Swap focus between the tiling area and the floating area
+    bindsym $mod+space focus mode_toggle
+
+    # Move focus to the parent container
+    bindsym $mod+a focus parent
+#
+# Scratchpad:
+#
+    # Sway has a "scratchpad", which is a bag of holding for windows.
+    # You can send windows there and get them back later.
+
+    # Move the currently focused window to the scratchpad
+    bindsym $mod+Shift+minus move scratchpad
+
+    # Show the next scratchpad window or hide the focused scratchpad window.
+    # If there are multiple scratchpad windows, this command cycles through them.
+    bindsym $mod+minus scratchpad show
+#
+# Resizing containers:
+#
+mode "resize" {
+    # left will shrink the containers width
+    # right will grow the containers width
+    # up will shrink the containers height
+    # down will grow the containers height
+    bindsym $left resize shrink width 10px
+    bindsym $down resize grow height 10px
+    bindsym $up resize shrink height 10px
+    bindsym $right resize grow width 10px
+
+    # Ditto, with arrow keys
+    bindsym Left resize shrink width 10px
+    bindsym Down resize grow height 10px
+    bindsym Up resize shrink height 10px
+    bindsym Right resize grow width 10px
+
+    # Return to default mode
+    bindsym Return mode "default"
+    bindsym Escape mode "default"
+}
+bindsym $mod+r mode "resize"
+
+#
+# Status Bar:
+#
+# Read `man 5 sway-bar` for more information about this section.
+
+bindsym XF86AudioRaiseVolume exec pactl set-sink-volume @DEFAULT_SINK@ +5% \
+	&& pkill -RTMIN+10 i3blocks;
+
+bindsym XF86AudioLowerVolume exec pactl set-sink-volume @DEFAULT_SINK@ -5% \
+	&& pkill -RTMIN+10 i3blocks;
+
+bindsym XF86AudioMute exec pactl set-sink-mute @DEFAULT_SINK@ toggle \
+	&& pkill -RTMIN+10 i3blocks;
+
+bindsym XF86AudioMicMute exec pactl set-source-mute @DEFAULT_SOURCE@ toggle
+bindsym XF86MonBrightnessDown exec brightnessctl set 10%-
+bindsym XF86MonBrightnessUp exec brightnessctl set 10%+
+
+bindsym $mod+Shift+p exec grimshot savecopy anything 
+bindsym $mod+Shift+s sticky toggle
+bindsym $mod+m exec swaylock -c 0x000000
+bindsym $mod+Shift+m output eDP-1 toggle
+
+bindgesture swipe:right workspace prev
+bindgesture swipe:left workspace next
+
+
+exec waybar 
+exec swaync 
+exec nm-applet
+exec blueman-applet
+exec /home/jozamudi/.local/repos/shikane/target/release/shikane
+exec wl-clipboard
+
+# Enables inhibit_idle when playing audio
+exec sway-audio-idle-inhibit
+
+include /etc/sway/config.d/*

.config/sway/config.d/keybinds

@@ -1,139 +0,0 @@
-### Key bindings
-# Start a terminal
-bindsym $mod+Return exec $term
-
-# Kill focused window
-bindsym $mod+Shift+q kill
-
-# Start your launcher
-bindsym $mod+d exec $menu
-
-# Drag floating windows by holding down $mod and left mouse button.
-# Resize them with right mouse button + $mod.
-# Despite the name, also works for non-floating windows.
-# Change normal to inverse to use left mouse button for resizing and right
-# mouse button for dragging.
-floating_modifier $mod normal
-
-# Reload the configuration file
-bindsym $mod+Shift+c reload
-
-# Exit sway (logs you out of your Wayland session)
-bindsym $mod+Shift+e exec swaynag -t warning -m 'You pressed the exit shortcut. Do you really want to exit sway? This will end your Wayland session.' -B 'Yes, exit sway' 'swaymsg exit'
-#
-# Moving around:
-#
-# Move your focus around
-bindsym $mod+$left focus left
-bindsym $mod+$down focus down
-bindsym $mod+$up focus up
-bindsym $mod+$right focus right
-# Or use $mod+[up|down|left|right]
-bindsym $mod+Left focus left
-bindsym $mod+Down focus down
-bindsym $mod+Up focus up
-bindsym $mod+Right focus right
-
-# Move the focused window with the same, but add Shift
-bindsym $mod+Shift+$left move left
-bindsym $mod+Shift+$down move down
-bindsym $mod+Shift+$up move up
-bindsym $mod+Shift+$right move right
-
-# Ditto, with arrow keys
-bindsym $mod+Shift+Left move left
-bindsym $mod+Shift+Down move down
-bindsym $mod+Shift+Up move up
-bindsym $mod+Shift+Right move right
-
-# Layout stuff:
-#
-# You can "split" the current object of your focus with
-# $mod+b or $mod+v, for horizontal and vertical splits
-# respectively.
-bindsym $mod+b splith
-bindsym $mod+v splitv
-
-# Switch the current container between different layout styles
-bindsym $mod+s layout stacking
-bindsym $mod+w layout tabbed
-bindsym $mod+e layout toggle split
-
-# Make the current focus fullscreen
-bindsym $mod+f fullscreen
-
-# Toggle the current focus between tiling and floating mode
-bindsym $mod+Shift+space floating toggle
-
-# Swap focus between the tiling area and the floating area
-bindsym $mod+space focus mode_toggle
-
-# Move focus to the parent container
-bindsym $mod+a focus parent
-#
-# Scratchpad:
-#
-# Sway has a "scratchpad", which is a bag of holding for windows.
-# You can send windows there and get them back later.
-
-# Move the currently focused window to the scratchpad
-bindsym $mod+Shift+minus move scratchpad
-
-# Show the next scratchpad window or hide the focused scratchpad window.
-# If there are multiple scratchpad windows, this command cycles through them.
-bindsym $mod+minus scratchpad show
-#
-# Resizing containers:
-#
-mode "resize" {
-    # left will shrink the containers width
-    # right will grow the containers width
-    # up will shrink the containers height
-    # down will grow the containers height
-    bindsym $right resize shrink width 10px
-    bindsym $down resize grow height 10px
-    bindsym $up resize shrink height 10px
-    bindsym $left resize grow width 10px
-
-    bindsym Shift+$right	resize shrink		width		40px
-    bindsym Shift+$down		resize grow			height	40px
-    bindsym Shift+$up			resize shrink		height	40px
-    bindsym Shift+$left		resize grow			width		40px
-
-    # Ditto, with arrow keys
-    bindsym Left resize shrink width 10px
-    bindsym Down resize grow height 10px
-    bindsym Up resize shrink height 10px
-    bindsym Right resize grow width 10px
-
-    # Return to default mode
-    bindsym Return mode "default"
-    bindsym Escape mode "default"
-}
-
-bindsym $mod+r mode "resize"
-bindsym $mod+Shift+s sticky toggle
-bindsym $mod+m exec 'playerctl pause && swaylock -c 0x0000' 
-
-# Toggle laptop display
-bindsym $mod+Shift+m output $laptop toggle
-
-bindsym XF86AudioRaiseVolume exec pactl set-sink-volume @DEFAULT_SINK@ +5% \
-	&& pkill -RTMIN+10 i3blocks;
-
-bindsym XF86AudioLowerVolume exec pactl set-sink-volume @DEFAULT_SINK@ -5% \
-	&& pkill -RTMIN+10 i3blocks;
-
-bindsym XF86AudioMute exec pactl set-sink-mute @DEFAULT_SINK@ toggle \
-	&& pkill -RTMIN+10 i3blocks;
-
-bindsym XF86AudioMicMute exec pactl set-source-mute @DEFAULT_SOURCE@ toggle
-
-bindsym XF86MonBrightnessDown exec brightnessctl set 5%-
-bindsym XF86MonBrightnessUp exec brightnessctl set 5%+
-
-bindsym $mod+shift+p exec slurp | grim -g - - | tee ~/Pictures/$(date +%s).png | wl-copy 
-
-bindgesture swipe:right workspace prev
-bindgesture swipe:left workspace next
-

.config/sway/config.d/windows

@@ -1,15 +0,0 @@
-# Generated windows.
-for_window [title="(?:Open|Save) (?:File|Folder|As)"] floating enable;
-for_window [title="(?:Open|Save) (?:File|Folder|As)"] resize set 800 600
-for_window [window_role="pop-up"] floating enable
-for_window [window_role="bubble"] floating enable
-for_window [window_role="task_dialog"] floating enable
-for_window [window_role="Preferences"] floating enable
-for_window [window_type="dialog"] floating enable
-for_window [window_type="menu"] floating enable
-
-for_window [shell="xwayland"] title_format "[XWayland] %title"
-for_window [title="LUCID"] floating enable
-for_window [title="Pydm|pydm"] floating enable
-for_window [title="Form"] floating enable
-for_window [title="zoom"] floating enable

.config/sway/config.d/workspaces

@@ -1,27 +0,0 @@
-# Workspaces:
-# Note: workspaces can have any name you want, not just numbers.
-# We just use 1-10 as the default.
-
-# Switch to workspace
-bindsym $mod+1 workspace number 1
-bindsym $mod+2 workspace number 2
-bindsym $mod+3 workspace number 3
-bindsym $mod+4 workspace number 4
-bindsym $mod+5 workspace number 5
-bindsym $mod+6 workspace number 6
-bindsym $mod+7 workspace number 7
-bindsym $mod+8 workspace number 8
-bindsym $mod+9 workspace number 9
-bindsym $mod+0 workspace number 10
-
-# Move focused container to workspace
-bindsym $mod+Shift+1 move container to workspace number 1
-bindsym $mod+Shift+2 move container to workspace number 2
-bindsym $mod+Shift+3 move container to workspace number 3
-bindsym $mod+Shift+4 move container to workspace number 4
-bindsym $mod+Shift+5 move container to workspace number 5
-bindsym $mod+Shift+6 move container to workspace number 6
-bindsym $mod+Shift+7 move container to workspace number 7
-bindsym $mod+Shift+8 move container to workspace number 8
-bindsym $mod+Shift+9 move container to workspace number 9
-bindsym $mod+Shift+0 move container to workspace number 10

.config/sway/scripts/clamshell-mode.sh

@@ -0,0 +1,12 @@
+#!/bin/sh
+
+LAPTOP_OUTPUT="eDP-1"
+LID_STATE_FILE="/proc/acpi/button/lid/LID0/state"
+
+read -r LS < "$LID_STATE_FILE"
+
+case "$LS" in
+*open)   swaymsg output "$LAPTOP_OUTPUT" enable ;;
+*closed) swaymsg output "$LAPTOP_OUTPUT" disable ;;
+*)       echo "Could not get lid state" >&2 ; exit 1 ;;
+esac

.config/waybar/config.jsonc

@@ -1,233 +0,0 @@
-// -*- mode: jsonc -*-
-{
-    // "layer": "top", // Waybar at top layer
-    "position": "top", // Waybar position (top|bottom|left|right)
-    //"height": 10, // Waybar height (to be removed for auto height)
-    //"width": 0, // Waybar width
-    "spacing": 10, // Gaps between modules (4px)
-    // Choose the order of the modules
-    "modules-left": [
-        "sway/workspaces",
-        "sway/mode",
-        "sway/scratchpad",
-        "custom/media"
-    ],
-    //"modules-center": [
-        //"sway/window"
-    //],
-    "modules-right": [
-        //"mpd",
-        //"custom/audio_idle_inhibitor",
-        //"pulseaudio",
-        //"network",
-        //"power-profiles-daemon",
-        //"cpu",
-        //"memory",
-        //"temperature",
-        //"backlight",
-        //"keyboard-state",
-        //"sway/language",
-        //"battery",
-        //"battery#bat2",
-        "clock",
-        "tray"
-        //"custom/power"
-    ],
-    // Modules configuration
-    // "sway/workspaces": {
-    //     "disable-scroll": true,
-    //     "all-outputs": true,
-    //     "warp-on-scroll": false,
-    //     "format": "{name}: {icon}",
-    //     "format-icons": {
-    //         "1": "",
-    //         "2": "",
-    //         "3": "",
-    //         "4": "",
-    //         "5": "",
-    //         "urgent": "",
-    //         "focused": "",
-    //         "default": ""
-    //     }
-    // },
-    "keyboard-state": {
-        "numlock": true,
-        "capslock": true,
-        "format": "{name} {icon}",
-        "format-icons": {
-            "locked": "",
-            "unlocked": ""
-        }
-    },
-    "sway/mode": {
-        "format": "<span style=\"italic\">{}</span>"
-    },
-    "sway/scratchpad": {
-        "format": "{icon} {count}",
-        "show-empty": false,
-        "format-icons": ["", ""],
-        "tooltip": true,
-        "tooltip-format": "{app}: {title}"
-    },
-    "mpd": {
-        "format": "{stateIcon} {consumeIcon}{randomIcon}{repeatIcon}{singleIcon}{artist} - {album} - {title} ({elapsedTime:%M:%S}/{totalTime:%M:%S}) ⸨{songPosition}|{queueLength}⸩ {volume}% ",
-        "format-disconnected": "Disconnected ",
-        //"format-stopped": "{consumeIcon}{randomIcon}{repeatIcon}{singleIcon}Stopped ",
-        "format-stopped": "",
-        "unknown-tag": "N/A",
-        "interval": 5,
-        "consume-icons": {
-            "on": " "
-        },
-        "random-icons": {
-            "off": "<span color=\"#f53c3c\"></span> ",
-            "on": " "
-        },
-        "repeat-icons": {
-            "on": " "
-        },
-        "single-icons": {
-            "on": "1 "
-        },
-        "state-icons": {
-            "paused": "",
-            "playing": ""
-        },
-        "tooltip-format": "MPD (connected)",
-        "tooltip-format-disconnected": "MPD (disconnected)"
-    },
-    "idle_inhibitor": {
-        "format": "{icon} ",
-        "format-icons": {
-            "activated": "",
-            "deactivated": ""
-        }
-    },
-    "tray": {
-        // "icon-size": 21,
-        "spacing": 10,
-        // "icons": {
-        //   "blueman": "bluetooth",
-        //   "TelegramDesktop": "$HOME/.local/share/icons/hicolor/16x16/apps/telegram.png"
-        // }
-    },
-    "clock": {
-        // "timezone": "America/New_York",
-        "tooltip-format": "<big>{:%Y %B}</big>\n<tt><small>{calendar}</small></tt>",
-				"format": "{:%r}",
-        "format-alt": "{:%Y-%m-%d}"
-    },
-    "cpu": {
-        "format": "{usage}% ",
-        "tooltip": false
-    },
-    "memory": {
-        "format": "{}% "
-    },
-    "temperature": {
-        // "thermal-zone": 2,
-        // "hwmon-path": "/sys/class/hwmon/hwmon2/temp1_input",
-        "critical-threshold": 80,
-        // "format-critical": "{temperatureC}°C {icon}",
-        "format": "{temperatureC}°C {icon}",
-        "format-icons": ["", "", ""]
-    },
-    "backlight": {
-        // "device": "acpi_video1",
-        "format": "{percent}% {icon}",
-        "format-icons": ["", "", "", "", "", "", "", "", ""]
-    },
-    "battery": {
-        "states": {
-            // "good": 95,
-            "warning": 30,
-            "critical": 15
-        },
-				"format": "{capacity}% {icon}",
-        "format-full": "{capacity}% {icon}",
-        "format-charging": "{capacity}% C",
-        "format-plugged": "{capacity}% P",
-        "format-alt": "{time} {icon}",
-        // "format-good": "", // An empty format will hide the module
-        // "format-full": "",
-        "format-icons": ["", "", "", "", ""]
-    },
-    "battery#bat2": {
-        "bat": "BAT2"
-    },
-    "power-profiles-daemon": {
-      "format": "{icon}",
-      "tooltip-format": "Power profile: {profile}\nDriver: {driver}",
-      "tooltip": true,
-      "format-icons": {
-        "default": "",
-        "performance": "",
-        "balanced": "",
-        "power-saver": ""
-      }
-    },
-    "network": {
-        // "interface": "wlp2*", // (Optional) To force the use of this interface
-        "format-wifi": "{essid} ({signalStrength}%) ",
-        "format-ethernet": "{ipaddr}/{cidr} ",
-        "tooltip-format": "{ifname} via {gwaddr} ",
-        "format-linked": "{ifname} (No IP) ",
-        "format-disconnected": "Disconnected ⚠",
-        "format-alt": "{ifname}: {ipaddr}/{cidr}"
-    },
-    "pulseaudio": {
-        // "scroll-step": 1, // %, can be a float
-        "format": "{volume}% {icon} {format_source}",
-        "format-bluetooth": "{volume}% {icon}  {format_source}",
-        "format-bluetooth-muted": " {icon} {format_source}",
-        "format-muted": " {format_source}",
-        "format-source": "{volume}% ",
-        "format-source-muted": "",
-        "format-icons": {
-            "headphone": "",
-            "hands-free": "",
-            "headset": "",
-            "phone": "",
-            "portable": "",
-            "car": "",
-            "default": ["", "", ""]
-        },
-        "on-click": "pavucontrol"
-    },
-    "custom/media": {
-        "format": "{icon} {text}",
-        "return-type": "json",
-        "max-length": 40,
-        "format-icons": {
-            "spotify": "",
-            "default": "🎜"
-        },
-        "escape": true,
-        "exec": "$HOME/.config/waybar/mediaplayer.py 2> /dev/null" // Script in resources folder
-        // "exec": "$HOME/.config/waybar/mediaplayer.py --player spotify 2> /dev/null" // Filter player based on name
-    },
-    "custom/power": {
-        "format" : "⏻ ",
-		"tooltip": false,
-		"menu": "on-click",
-		"menu-file": "$HOME/.config/waybar/power_menu.xml", // Menu file in resources folder
-		"menu-actions": {
-			"shutdown": "shutdown",
-			"reboot": "reboot",
-			"suspend": "systemctl suspend",
-			"hibernate": "systemctl hibernate"
-		}
-    },
-		"custom/audio_idle_inhibitor": {
-		"format": "{icon} ",
-		"exec": "sway-audio-idle-inhibit --dry-print-both-waybar",
-		"exec-if": "which sway-audio-idle-inhibit",
-		"return-type": "json",
-		"format-icons": {
-			"output": "",
-			"input": "",
-			"output-input": "  ",
-			"none": ""
-		}
-	}
-}

.config/waybar/style.css

@@ -1,328 +0,0 @@
-* {
-    /* `otf-font-awesome` is required to be installed for icons */
-    /*font-family: FontAwesome, Roboto, Helvetica, Arial, sans-serif; */
-	font-family: "JetBrainsMonoNFM-Regular";
-    font-weight: bold;
-    font-size: 15px;
-}
-
-window#waybar {
-    /*background-color: rgba(43, 48, 59, 0.5);*/
-    background-color: rgba(0, 0, 0, 1);
-    /*border-bottom: 3px solid rgba(100, 114, 125, 0.5);*/
-    color: #ffffff;
-    transition-property: background-color;
-    transition-duration: .5s;
-}
-
-window#waybar.hidden {
-    opacity: 0.2;
-}
-
-window#waybar.empty {
-    /*background-color: transparent;*/
-}
-window#waybar.solo {
-    /*background-color: #FFFFFF;*/
-}
-
-window#waybar.termite {
-    background-color: #3F3F3F;
-}
-
-window#waybar.chromium {
-    background-color: #000000;
-    border: none;
-}
-
-button {
-    /* Use box-shadow instead of border so the text isn't offset */
-    /*box-shadow: inset 0 -3px transparent;*/
-    /* Avoid rounded borders under each button name */
-    border: none;
-    border-radius: 0;
-}
-
-/* https://github.com/Alexays/Waybar/wiki/FAQ#the-workspace-buttons-have-a-strange-hover-effect */
-button:hover {
-    background: inherit;
-    box-shadow: inset 0 -3px #ffffff;
-}
-
-/* you can set a style on hover for any module like this */
-#pulseaudio:hover {
-    /*background-color: #a37800;*/
-}
-
-#workspaces button {
-    padding: 0 5px;
-    background-color: transparent;
-    color: #ffffff;
-}
-
-#workspaces button:hover {
-    background: rgba(0, 0, 0, 0.2);
-}
-
-#workspaces button.focused {
-    background-color: #64727D;
-    box-shadow: inset 0 -3px #ffffff;
-}
-
-#workspaces button.urgent {
-    background-color: #eb4d4b;
-}
-
-#mode {
-    background-color: #64727D;
-    box-shadow: inset 0 -3px #ffffff;
-}
-
-#clock,
-#battery,
-#cpu,
-#memory,
-#disk,
-#temperature,
-#backlight,
-#network,
-#pulseaudio,
-#wireplumber,
-#custom-media,
-#tray,
-#mode,
-#idle_inhibitor,
-#scratchpad,
-#power-profiles-daemon,
-#mpd {
-    padding: 0 10px;
-    color: #ffffff;
-}
-
-#window,
-#workspaces {
-    margin: 0 4px;
-}
-
-/* If workspaces is the leftmost module, omit left margin */
-.modules-left > widget:first-child > #workspaces {
-    margin-left: 0;
-}
-
-/* If workspaces is the rightmost module, omit right margin */
-.modules-right > widget:last-child > #workspaces {
-    margin-right: 0;
-}
-
-#clock {
-   /* background-color: #64727D;*/
-}
-
-#battery {
-    /*background-color: #ffffff;
-    color: #000000;*/
-}
-
-#battery.charging, #battery.plugged {
-    /*color: #ffffff;
-    background-color: #26A65B;*/
-}
-
-@keyframes blink {
-    to {
-        background-color: #ffffff;
-        color: #000000;
-    }
-}
-
-/* Using steps() instead of linear as a timing function to limit cpu usage */
-#battery.critical:not(.charging) {
-    background-color: #f53c3c;
-    color: #ffffff;
-    animation-name: blink;
-    animation-duration: 0.5s;
-    animation-timing-function: steps(12);
-    animation-iteration-count: infinite;
-    animation-direction: alternate;
-}
-
-#power-profiles-daemon {
-    padding-right: 15px;
-}
-
-#power-profiles-daemon.performance {
-    background-color: #f53c3c;
-    color: #ffffff;
-}
-
-#power-profiles-daemon.balanced {
-    background-color: #2980b9;
-    color: #ffffff;
-}
-
-#power-profiles-daemon.power-saver {
-    background-color: #2ecc71;
-    color: #000000;
-}
-
-label:focus {
-    background-color: #000000;
-}
-
-#cpu {
-    background-color: #2ecc71;
-    color: #000000;
-}
-
-#memory {
-    background-color: #9b59b6;
-}
-
-#disk {
-    background-color: #964B00;
-}
-
-#backlight {
-    background-color: #90b1b1;
-}
-
-#network {
-    /*background-color: #2980b9;*/
-}
-
-#network.disconnected {
-    /*background-color: #f53c3c;*/
-}
-
-#pulseaudio {
-    /*background-color: #f1c40f;*/
-    /*color: #000000;*/
-}
-
-#pulseaudio.muted {
-    /*background-color: #90b1b1;*/
-    /*color: #2a5c45;*/
-}
-
-#wireplumber {
-    background-color: #fff0f5;
-    color: #000000;
-}
-
-#wireplumber.muted {
-    background-color: #f53c3c;
-}
-
-#custom-media {
-    background-color: #66cc99;
-    color: #2a5c45;
-    min-width: 100px;
-}
-
-#custom-media.custom-spotify {
-    background-color: #66cc99;
-}
-
-#custom-media.custom-vlc {
-    background-color: #ffa000;
-}
-
-#temperature {
-    background-color: #f0932b;
-}
-
-#temperature.critical {
-    background-color: #eb4d4b;
-}
-
-#tray {
-    /*background-color: #2980b9;*/
-}
-
-#tray > .passive {
-    -gtk-icon-effect: dim;
-}
-
-#tray > .needs-attention {
-    -gtk-icon-effect: highlight;
-    background-color: #eb4d4b;
-}
-
-#idle_inhibitor {
-    background-color: #2d3436;
-}
-
-#idle_inhibitor.activated {
-    background-color: #ecf0f1;
-    color: #2d3436;
-}
-
-#mpd {
-    background-color: #66cc99;
-    color: #2a5c45;
-}
-
-#mpd.disconnected {
-    background-color: #f53c3c;
-}
-
-#mpd.stopped {
-    background-color: #90b1b1;
-}
-
-#mpd.paused {
-    background-color: #51a37a;
-}
-
-#language {
-    background: #00b093;
-    color: #740864;
-    padding: 0 5px;
-    margin: 0 5px;
-    min-width: 16px;
-}
-
-#keyboard-state {
-    background: #97e1ad;
-    color: #000000;
-    padding: 0 0px;
-    margin: 0 5px;
-    min-width: 16px;
-}
-
-#keyboard-state > label {
-    padding: 0 5px;
-}
-
-#keyboard-state > label.locked {
-    background: rgba(0, 0, 0, 0.2);
-}
-
-#scratchpad {
-    background: rgba(0, 0, 0, 0.2);
-}
-
-#scratchpad.empty {
-	background-color: transparent;
-}
-
-#privacy {
-    padding: 0;
-}
-
-#privacy-item {
-    padding: 0 5px;
-    color: white;
-}
-
-#privacy-item.screenshare {
-    background-color: #cf5700;
-}
-
-#privacy-item.audio-in {
-    background-color: #1ca000;
-}
-
-#privacy-item.audio-out {
-    background-color: #0069d4;
-}

.zshrc

@@ -1,20 +0,0 @@
-# Auto Complete
-autoload -Uz compinit
-compinit
-
-
-# Alias
-alias vim='nvim'
-
-# Config
-source <(fzf --zsh)
-
-
-autoload -Uz vcs_info
-precmd_vcs_info() { vcs_info }
-precmd_functions+=( precmd_vcs_info )
-setopt prompt_subst
-RPROMPT='${vcs_info_msg_0_}'
-#PROMPT='${vcs_info_msg_0_}%# '
-PROMPT='%~%# '
-zstyle ':vcs_info:git:*' formats '%b'