feat: zsh color

.config/hypr/hypridle.conf

@@ -0,0 +1,34 @@
+general {
+    lock_cmd = pidof hyprlock || hyprlock       # avoid starting multiple hyprlock instances.
+    before_sleep_cmd = loginctl lock-session    # lock before suspend.
+    after_sleep_cmd = hyprctl dispatch dpms on  # to avoid having to press a key twice to turn on the display.
+}
+
+listener {
+    timeout = 150                                # 2.5min.
+    on-timeout = brightnessctl -s set 10         # set monitor backlight to minimum, avoid 0 on OLED monitor.
+    on-resume = brightnessctl -r                 # monitor backlight restore.
+}
+
+# turn off keyboard backlight, comment out this section if you dont have a keyboard backlight.
+listener { 
+    timeout = 150                                          # 2.5min.
+    on-timeout = brightnessctl -sd rgb:kbd_backlight set 0 # turn off keyboard backlight.
+    on-resume = brightnessctl -rd rgb:kbd_backlight        # turn on keyboard backlight.
+}
+
+listener {
+    timeout = 300                                 # 5min
+    on-timeout = loginctl lock-session            # lock screen when timeout has passed
+}
+
+listener {
+    timeout = 330                                                     # 5.5min
+    on-timeout = hyprctl dispatch dpms off                            # screen off when timeout has passed
+    on-resume = hyprctl dispatch dpms on && brightnessctl -r          # screen on when activity is detected after timeout has fired.
+}
+
+listener {
+    timeout = 1800                                # 30min
+    on-timeout = systemctl suspend                # suspend pc
+}

.config/hypr/hyprland.conf

@@ -1,15 +1,14 @@
 
 # #######################################################################################
-# AUTOGENERATED HYPR CONFIG.
+# AUTOGENERATED HYPRLAND CONFIG.
-# PLEASE USE THE CONFIG PROVIDED IN THE GIT REPO /examples/hypr.conf AND EDIT IT,
+# EDIT THIS CONFIG ACCORDING TO THE WIKI INSTRUCTIONS.
-# OR EDIT THIS ONE ACCORDING TO THE WIKI INSTRUCTIONS.
 # #######################################################################################
 
 autogenerated = 0 # remove this line to remove the warning
 
 # This is an example Hyprland config file.
 # Refer to the wiki for more information.
-# https://wiki.hyprland.org/Configuring/Configuring-Hyprland/
+# https://wiki.hypr.land/Configuring/
 
 # Please note not all available settings / options are set here.
 # For a full list, see the wiki
@@ -23,21 +22,21 @@ autogenerated = 0 # remove this line to remove the warning
 ### MONITORS ###
 ################
 
-# See https://wiki.hyprland.org/Configuring/Monitors/
+# See https://wiki.hypr.land/Configuring/Monitors/
-monitor=DP-6,preferred,0x0,auto
+monitor=,preferred,auto,auto
-monitor=eDP-1,preferred,0x2160,1.8
+#exec-once = swaybg -i /usr/share/backgrounds/gnome/vnc-d.png
 
 
 ###################
 ### MY PROGRAMS ###
 ###################
 
-# See https://wiki.hyprland.org/Configuring/Keywords/
+# See https://wiki.hypr.land/Configuring/Keywords/
 
 # Set programs that you use
-$terminal = footclient
+$terminal = kitty
-$fileManager = dolphin
+$fileManager = nautilus
-$menu = wofi --show drun
+$menu = wofi --show drun -GI
 
 
 #################
@@ -46,66 +45,97 @@ $menu = wofi --show drun
 
 # Autostart necessary processes (like notifications daemons, status bars, etc.)
 # Or execute your favorite apps at launch like this:
-exec-once = waybar
+
-exec-once = foot --server
-exec-once = nextcloud-desktop-client.nextcoud
 # exec-once = $terminal
 # exec-once = nm-applet &
 # exec-once = waybar & hyprpaper & firefox
+exec-once = hypridle
+exec-once = nm-applet &
+exec-once = blueman-applet &
+exec-once = shikane &
+exec-once = waybar -c ~/.config/hypr/waybar/config.jsonc -s ~/.config/hypr/waybar/style.css &
+exec-once = hyprpm reload -n
+exec-once = flatpak run com.github.wwmm.easyeffects -w
+exec-once = powertop --auto-tune
+exec-once = systemctl --user start hyprpolkitagent
+exec-once = xrdb -merge ~/.Xresources
+exec-once = gsettings set org.gnome.desktop.interface color-scheme "prefer-dark"
                          
 
 #############################
 ### ENVIRONMENT VARIABLES ###
 #############################
 
-# See https://wiki.hyprland.org/Configuring/Environment-variables/
+# See https://wiki.hypr.land/Configuring/Environment-variables/
 
 env = XCURSOR_SIZE,24
 env = HYPRCURSOR_SIZE,24
 
 
+###################
+### PERMISSIONS ###
+###################
+
+# See https://wiki.hypr.land/Configuring/Permissions/
+# Please note permission changes here require a Hyprland restart and are not applied on-the-fly
+# for security reasons
+
+# ecosystem {
+#   enforce_permissions = 1
+# }
+
+permission = /usr/(bin|local/bin)/grim, screencopy, allow
+permission = /usr/(lib|libexec|lib64)/xdg-desktop-portal-hyprland, screencopy, allow
+permission = /usr/(bin|local/bin)/hyprpm, plugin, allow
+
+
 #####################
 ### LOOK AND FEEL ###
 #####################
 
-# Refer to https://wiki.hyprland.org/Configuring/Variables/
+# Refer to https://wiki.hypr.land/Configuring/Variables/
 
-# https://wiki.hyprland.org/Configuring/Variables/#general
+# https://wiki.hypr.land/Configuring/Variables/#general
 general {
     gaps_in = 2
     gaps_out = 2
 
     border_size = 1
 
-    # https://wiki.hyprland.org/Configuring/Variables/#variable-types for info about colors
+    # https://wiki.hypr.land/Configuring/Variables/#variable-types for info about colors
     col.active_border = rgba(33ccffee) rgba(00ff99ee) 45deg
     col.inactive_border = rgba(595959aa)
 
     # Set to true enable resizing windows by clicking and dragging on borders and gaps
     resize_on_border = true
 
-    # Please see https://wiki.hyprland.org/Configuring/Tearing/ before you turn this on
+    # Please see https://wiki.hypr.land/Configuring/Tearing/ before you turn this on
-    allow_tearing = false
+    allow_tearing = true
 
-    layout = dwindle
+    #layout = dwindle
+    layout = hy3
 }
 
-# https://wiki.hyprland.org/Configuring/Variables/#decoration
+
+# https://wiki.hypr.land/Configuring/Variables/#decoration
 decoration {
-    rounding = 10
+    rounding = 4
+    rounding_power = 2
 
     # Change transparency of focused and unfocused windows
     active_opacity = 1.0
     inactive_opacity = 1.0
 
-    drop_shadow = true
+    shadow {
-    shadow_range = 4
+        enabled = false
-    shadow_render_power = 3
+        range = 4
-    col.shadow = rgba(1a1a1aee)
+        render_power = 3
+        color = rgba(1a1a1aee)
+    }
 
-    # https://wiki.hyprland.org/Configuring/Variables/#blur
+    # https://wiki.hypr.land/Configuring/Variables/#blur
     blur {
-        enabled = true
+        enabled = false
         size = 3
         passes = 1
 
@@ -113,45 +143,79 @@ decoration {
     }
 }
 
-# https://wiki.hyprland.org/Configuring/Variables/#animations
+# https://wiki.hypr.land/Configuring/Variables/#animations
 animations {
-    enabled = true
+    enabled = yes, please :)
 
-    # Default animations, see https://wiki.hyprland.org/Configuring/Animations/ for more
 
-    bezier = myBezier, 0.05, 0.9, 0.1, 1.05
+    # Default curves, see https://wiki.hypr.land/Configuring/Animations/#curves
+    #        NAME,           X0,   Y0,   X1,   Y1
+    bezier = easeOutQuint,   0.23, 1,    0.32, 1
+    bezier = easeInOutCubic, 0.65, 0.05, 0.36, 1
+    bezier = linear,         0,    0,    1,    1
+    bezier = almostLinear,   0.5,  0.5,  0.75, 1
+    bezier = quick,          0.15, 0,    0.1,  1
 
-    animation = windows, 1, 7, myBezier
+    # Default animations, see https://wiki.hypr.land/Configuring/Animations/
-    animation = windowsOut, 1, 7, default, popin 80%
+    #           NAME,          ONOFF, SPEED, CURVE,        [STYLE]
-    animation = border, 1, 10, default
+    animation = global,        1,     10,    default
-    animation = borderangle, 1, 8, default
+    animation = border,        1,     5.39,  easeOutQuint
-    animation = fade, 1, 7, default
+    animation = windows,       1,     4.79,  easeOutQuint
-    animation = workspaces, 1, 6, default
+    animation = windowsIn,     1,     4.1,   easeOutQuint, popin 87%
+    animation = windowsOut,    1,     1.49,  linear,       popin 87%
+    animation = fadeIn,        1,     1.73,  almostLinear
+    animation = fadeOut,       1,     1.46,  almostLinear
+    animation = fade,          1,     3.03,  quick
+    animation = layers,        1,     3.81,  easeOutQuint
+    animation = layersIn,      1,     4,     easeOutQuint, fade
+    animation = layersOut,     1,     1.5,   linear,       fade
+    animation = fadeLayersIn,  1,     1.79,  almostLinear
+    animation = fadeLayersOut, 1,     1.39,  almostLinear
+    animation = workspaces,    1,     1.94,  almostLinear, fade
+    animation = workspacesIn,  1,     1.21,  almostLinear, fade
+    animation = workspacesOut, 1,     1.94,  almostLinear, fade
+    animation = zoomFactor,    1,     7,     quick
 }
 
-# See https://wiki.hyprland.org/Configuring/Dwindle-Layout/ for more
+# Ref https://wiki.hypr.land/Configuring/Workspace-Rules/
+# "Smart gaps" / "No gaps when only"
+# uncomment all if you wish to use that.
+# workspace = w[tv1], gapsout:0, gapsin:0
+# workspace = f[1], gapsout:0, gapsin:0
+# windowrule = bordersize 0, floating:0, onworkspace:w[tv1]
+# windowrule = rounding 0, floating:0, onworkspace:w[tv1]
+# windowrule = bordersize 0, floating:0, onworkspace:f[1]
+# windowrule = rounding 0, floating:0, onworkspace:f[1]
+
+# See https://wiki.hypr.land/Configuring/Dwindle-Layout/ for more
 dwindle {
     pseudotile = true # Master switch for pseudotiling. Enabling is bound to mainMod + P in the keybinds section below
     preserve_split = true # You probably want this
 }
 
-# See https://wiki.hyprland.org/Configuring/Master-Layout/ for more
+# See https://wiki.hypr.land/Configuring/Master-Layout/ for more
 master {
     new_status = master
 }
 
-# https://wiki.hyprland.org/Configuring/Variables/#misc
+# https://wiki.hypr.land/Configuring/Variables/#misc
 misc {
-    force_default_wallpaper = -1 # Set to 0 or 1 to disable the anime mascot wallpapers
+    force_default_wallpaper = 0 # Set to 0 or 1 to disable the anime mascot wallpapers
-    disable_hyprland_logo = false # If true disables the random hyprland logo / anime girl background. :(
+    disable_hyprland_logo = true# If true disables the random hyprland logo / anime girl background. :(
 }
 
+xwayland {
+    force_zero_scaling = true
+}
+env = GTK_SCALE,2
+env = XCURSOR_SIZE,32
+
 
 #############
 ### INPUT ###
 #############
 
-# https://wiki.hyprland.org/Configuring/Variables/#input
+# https://wiki.hypr.land/Configuring/Variables/#input
 input {
     kb_layout = us
     kb_variant =
@@ -165,64 +229,70 @@ input {
 
     touchpad {
         natural_scroll = false
+        tap-to-click = false
     }
 }
 
-# https://wiki.hyprland.org/Configuring/Variables/#gestures
+# See https://wiki.hypr.land/Configuring/Gestures
-gestures {
+gesture = 3, horizontal, workspace
-    workspace_swipe = true
-}
 
 # Example per-device config
-# See https://wiki.hyprland.org/Configuring/Keywords/#per-device-input-configs for more
+# See https://wiki.hypr.land/Configuring/Keywords/#per-device-input-configs for more
 device {
     name = epic-mouse-v1
     sensitivity = -0.5
 }
 
 
-####################
+###################
-### KEYBINDINGSS ###
+### KEYBINDINGS ###
-####################
+###################
 
-# See https://wiki.hyprland.org/Configuring/Keywords/
+# See https://wiki.hypr.land/Configuring/Keywords/
 $mainMod = SUPER # Sets "Windows" key as main modifier
 
-# Example binds, see https://wiki.hyprland.org/Configuring/Binds/ for more
+# Example binds, see https://wiki.hypr.land/Configuring/Binds/ for more
 bind = $mainMod, RETURN, exec, $terminal
-bind = $mainMod, R, exec, $menu
+bind = $mainMod, D, exec, $menu
-bind = $mainMod, E, exec, $fileManager
+bind = $mainMod, F, fullscreen
+bind = $mainMod, M, exec, swaylock -c 0x000000; playerctl pause
 
-#bind = $mainMod, J, togglesplit, # dwindle
-bind = $mainMod, W, togglegroup,
 bind = $mainMod SHIFT, SPACE, togglefloating,
-bind = $mainMod SHIFT, Q, killactive,
+bind = $mainMod SHIFT, Q, hy3:killactive,
 bind = $mainMod SHIFT, M, exit,
+bind = $mainMod SHIFT, S, pin
 
-# Move focus with hjkl
-bind = $mainMod, h, movefocus, l
-bind = $mainMod, l, movefocus, r
-bind = $mainMod, k, movefocus, u
-bind = $mainMod, j, movefocus, d
-
-# Move focus with hjkl
-bind = $mainMod SHIFT, h, movewindoworgroup, l
-bind = $mainMod SHIFT, l, movewindoworgroup, r
-bind = $mainMod SHIFT, k, movewindoworgroup, u
-bind = $mainMod SHIFT, j, movewindoworgroup, d
-
-# move inside of grouped windows
-bind = $mainMod, n, changegroupactive, f
-bind = $mainMod, p, changegroupactive, b
 
+bind = $mainMod, B, hy3:makegroup, h
+bind = $mainMod, V, hy3:makegroup, v
+bind = $mainMod, W, hy3:makegroup, tab
+bind = $mainMod, X, hy3:locktab
+bind = $mainMod, R, hy3:changegroup, opposite
+#bind = $mainMod SHIFT, A, hy3:changefocus, lower
+#bind = $mainMod, A, hy3:changefocus, raise
+#bind = $mainMod SHIFT, E, hy3:expand, base
+#bind = $mainMod, E, hy3:expand, expand
 
 # Move focus with mainMod + arrow keys
-bind = $mainMod, left, movefocus, l
+bind = $mainMod, h, hy3:movefocus, l
-bind = $mainMod, right, movefocus, r
+bind = $mainMod, j, hy3:movefocus, d
-bind = $mainMod, up, movefocus, u
+bind = $mainMod, k, hy3:movefocus, u
-bind = $mainMod, down, movefocus, d
+bind = $mainMod, l, hy3:movefocus, r
+bind = $mainMod, left, hy3:movefocus, l
+bind = $mainMod, down, hy3:movefocus, d
+bind = $mainMod, up, hy3:movefocus, u
+bind = $mainMod, right, hy3:movefocus, r
 
 
+bind = $mainMod SHIFT, h, hy3:movewindow, l, once
+bind = $mainMod SHIFT, j, hy3:movewindow, d, once
+bind = $mainMod SHIFT, k, hy3:movewindow, u, once
+bind = $mainMod SHIFT, l, hy3:movewindow, r, once
+bind = $mainMod SHIFT, left, hy3:movewindow, l, once
+bind = $mainMod SHIFT, down, hy3:movewindow, d, once
+bind = $mainMod SHIFT, up, hy3:movewindow, u, once
+bind = $mainMod SHIFT, right, hy3:movewindow, r, once
+
 # Switch workspaces with mainMod + [0-9]
 bind = $mainMod, 1, workspace, 1
 bind = $mainMod, 2, workspace, 2
@@ -236,24 +306,16 @@ bind = $mainMod, 9, workspace, 9
 bind = $mainMod, 0, workspace, 10
 
 # Move active window to a workspace with mainMod + SHIFT + [0-9]
-bind = $mainMod SHIFT, 1, movetoworkspace, 1
+bind = $mainMod SHIFT, 1, hy3:movetoworkspace, 1
-bind = $mainMod SHIFT, 2, movetoworkspace, 2
+bind = $mainMod SHIFT, 2, hy3:movetoworkspace, 2
-bind = $mainMod SHIFT, 3, movetoworkspace, 3
+bind = $mainMod SHIFT, 3, hy3:movetoworkspace, 3
-bind = $mainMod SHIFT, 4, movetoworkspace, 4
+bind = $mainMod SHIFT, 4, hy3:movetoworkspace, 4
-bind = $mainMod SHIFT, 5, movetoworkspace, 5
+bind = $mainMod SHIFT, 5, hy3:movetoworkspace, 5
-bind = $mainMod SHIFT, 6, movetoworkspace, 6
+bind = $mainMod SHIFT, 6, hy3:movetoworkspace, 6
-bind = $mainMod SHIFT, 7, movetoworkspace, 7
+bind = $mainMod SHIFT, 7, hy3:movetoworkspace, 7
-bind = $mainMod SHIFT, 8, movetoworkspace, 8
+bind = $mainMod SHIFT, 8, hy3:movetoworkspace, 8
-bind = $mainMod SHIFT, 9, movetoworkspace, 9
+bind = $mainMod SHIFT, 9, hy3:movetoworkspace, 9
-bind = $mainMod SHIFT, 0, movetoworkspace, 10
+bind = $mainMod SHIFT, 0, hy3:movetoworkspace, 10
-
-bind = $mainMod, F, fullscreen
-
-bindel = ,XF86AudioRaiseVolume, exec, wpctl set-volume @DEFAULT_AUDIO_SINK@ 5%+
-bindel = ,XF86AudioLowerVolume, exec, wpctl set-volume @DEFAULT_AUDIO_SINK@ 5%-
-bindel = ,XF86AudioMute, exec, wpctl set-mute @DEFAULT_AUDIO_SINK@ toggle
-bindel = ,XF86MonBrightnessDown, exec, brightnessctl set 5%-
-bindel = ,XF86MonBrightnessUp ,exec ,brightnessctl set 5%+
 
 # Example special workspace (scratchpad)
 bind = $mainMod, MINUS, togglespecialworkspace, magic
@@ -267,18 +329,36 @@ bind = $mainMod, mouse_up, workspace, e-1
 bindm = $mainMod, mouse:272, movewindow
 bindm = $mainMod, mouse:273, resizewindow
 
+# Laptop multimedia keys for volume and LCD brightness
+bindel = ,XF86AudioRaiseVolume, exec, wpctl set-volume -l 1 @DEFAULT_AUDIO_SINK@ 5%+
+bindel = ,XF86AudioLowerVolume, exec, wpctl set-volume @DEFAULT_AUDIO_SINK@ 5%-
+bindel = ,XF86AudioMute, exec, wpctl set-mute @DEFAULT_AUDIO_SINK@ toggle
+bindel = ,XF86AudioMicMute, exec, wpctl set-mute @DEFAULT_AUDIO_SOURCE@ toggle
+bindel = ,XF86MonBrightnessUp, exec, brightnessctl -e4 -n2 set 5%+
+bindel = ,XF86MonBrightnessDown, exec, brightnessctl -e4 -n2 set 5%-
+
+# Requires playerctl
+bindl = , XF86AudioNext, exec, playerctl next
+bindl = , XF86AudioPause, exec, playerctl play-pause
+bindl = , XF86AudioPlay, exec, playerctl play-pause
+bindl = , XF86AudioPrev, exec, playerctl previous
+
+# Screenshots
+bindel = $mainMod, p, exec, grimshot --notify savecopy anything
+bindel = $mainMod, m, exec, shikanectl reload
 
 ##############################
 ### WINDOWS AND WORKSPACES ###
 ##############################
 
-# See https://wiki.hyprland.org/Configuring/Window-Rules/ for more
+# See https://wiki.hypr.land/Configuring/Window-Rules/ for more
-# See https://wiki.hyprland.org/Configuring/Workspace-Rules/ for workspace rules
+# See https://wiki.hypr.land/Configuring/Workspace-Rules/ for workspace rules
 
-# Example windowrule v1
+# Example windowrule
-# windowrule = float, ^(kitty)$
+# windowrule = float,class:^(kitty)$,title:^(kitty)$
 
-# Example windowrule v2
+# Ignore maximize requests from apps. You'll probably like this.
-# windowrulev2 = float,class:^(kitty)$,title:^(kitty)$
+#windowrule = suppressevent maximize, class:.*
 
-windowrulev2 = suppressevent maximize, class:.* # You'll probably like this.
+# Fix some dragging issues with XWayland
+#windowrule = nofocus,class:^$,title:^$,xwayland:1,floating:1,fullscreen:0,pinned:0

.config/hypr/hyprlock.conf

@@ -0,0 +1,20 @@
+background {
+  monitor = # monitor-agnostic
+  blur_passes = 1
+  blur_size = 7
+}
+
+input-field {
+  monitor =
+  size = 20%, 5%
+  font_family = Noto Sans
+  dots_size = 0.08
+}
+
+
+label {
+  monitor =
+  text = $TIME
+  font_size = 80
+  position = 0, -10
+}

.config/hypr/waybar/config.jsonc

@@ -0,0 +1,118 @@
+// -*- mode: jsonc -*-
+{
+    "spacing": 2, // Gaps between modules (4px)
+    "modules-left": [
+        "hyprland/workspaces",
+        "hyprland/mode",
+        "hyprland/scratchpad",
+        "hyprland/window"
+    ],
+    "modules-center": [
+      //"sway/window"
+      "clock",
+    ],
+    "modules-right": [
+        //"mpd",
+        "pulseaudio",
+        //"network",
+        "battery",
+        "tray"
+        //"custom/power"
+    ],
+    "sway/mode": {
+        "format": "<span style=\"italic\">{}</span>"
+    },
+    "sway/scratchpad": {
+        "format": "{icon} {count}",
+        "show-empty": false,
+        "format-icons": ["", ""],
+        "tooltip": true,
+        "tooltip-format": "{app}: {title}"
+    },
+    "tray": {
+        // "icon-size": 21,
+        "spacing": 10,
+        // "icons": {
+        //   "blueman": "bluetooth",
+        //   "TelegramDesktop": "$HOME/.local/share/icons/hicolor/16x16/apps/telegram.png"
+        // }
+    },
+    "clock": {
+        //"timezone": "America/Los_Angeles",
+        "tooltip-format": "<big>{:%Y %B}</big>\n<tt><small>{calendar}</small></tt>",
+				"format": "{:%c}",
+				//"format": "{:%R %p  %Y-%m-%d}",
+        //"format-alt": "{:%Y-%m-%d}"
+    },
+    "battery": {
+        "states": {
+            // "good": 95,
+            "warning": 30,
+            "critical": 15
+        },
+		//"format": "{time} {capacity}% {icon}",
+		"format": "{capacity}% {icon}",
+        "format-full": "{capacity}% {icon}",
+        "format-charging": "{capacity}% C",
+        "format-plugged": "{capacity}% P",
+        "format-alt": "{time} {icon}",
+        // "format-good": "", // An empty format will hide the module
+        // "format-full": "",
+        "format-icons": ["", "", "", "", ""]
+    },
+    "battery#bat2": {
+        "bat": "BAT2"
+    },
+    "power-profiles-daemon": {
+      "format": "{icon}",
+      "tooltip-format": "Power profile: {profile}\nDriver: {driver}",
+      "tooltip": true,
+      "format-icons": {
+        "default": "",
+        "performance": "",
+        "balanced": "",
+        "power-saver": ""
+      }
+    },
+    "network": {
+        // "interface": "wlp2*", // (Optional) To force the use of this interface
+        //"format-wifi": "{essid} ({signalStrength}%) ",
+        //"format-ethernet": "{ipaddr}/{cidr} ",
+        //"tooltip-format": "{ifname} via {gwaddr} ",
+        //"format-linked": "{ifname} (No IP) ",
+        //"format-disconnected": "Disconnected ⚠",
+        "format-disconnected": "Disconnected",
+        "format-alt": "{ifname}: {ipaddr}/{cidr}"
+    },
+    "pulseaudio": {
+        // "scroll-step": 1, // %, can be a float
+        "format": "{volume}%  {icon}   {format_source}",
+        "format-bluetooth": "{volume}% {icon}  {format_source}",
+        "format-bluetooth-muted": "  {icon}  {format_source}",
+        "format-muted": " {format_source}",
+        "format-source": "{volume}% ",
+        "format-source-muted": "",
+        "format-icons": {
+            "headphone": "",
+            "hands-free": "",
+            "headset": "",
+            "phone": "",
+            "portable": "",
+            "car": "",
+            "default": ["", "", ""]
+        },
+        "on-click": "pavucontrol"
+    },
+    "custom/media": {
+        "format": "{icon} {text}",
+        "return-type": "json",
+        "max-length": 40,
+        "format-icons": {
+            "spotify": "",
+            "default": "🎜"
+        },
+        "escape": true,
+        "exec": "$HOME/.config/waybar/mediaplayer.py 2> /dev/null" // Script in resources folder
+        // "exec": "$HOME/.config/waybar/mediaplayer.py --player spotify 2> /dev/null" // Filter player based on name
+    }
+}

.config/hypr/waybar/style.css

@@ -0,0 +1,321 @@
+* {
+    /* `otf-font-awesome` is required to be installed for icons */
+    /*font-family: FontAwesome, Roboto, Helvetica, Arial, sans-serif; */
+	/*font-family: "JetBrainsMono NF";*/
+    font-family: "JetBrainsMonoNFM-Regular";
+    font-size: 14px;
+    font-weight: bold;
+}
+
+window#waybar {
+    /*background-color: rgba(43, 48, 59, 0.5);
+    border-bottom: 3px solid rgba(100, 114, 125, 0.5); */
+    background-color: rgba(0, 0, 0, 1);
+    color: #ffffff;
+    transition-property: background-color;
+    transition-duration: .5s;
+}
+
+window#waybar.hidden {
+    opacity: 0.2;
+}
+
+window#waybar.empty {
+    /*background-color: transparent;*/
+}
+window#waybar.solo {
+    /*background-color: #FFFFFF;*/
+}
+
+
+button {
+    /* Use box-shadow instead of border so the text isn't offset */
+    box-shadow: inset 0 -3px transparent;
+    /* Avoid rounded borders under each button name */
+    border: none;
+    border-radius: 0;
+}
+
+/* https://github.com/Alexays/Waybar/wiki/FAQ#the-workspace-buttons-have-a-strange-hover-effect */
+button:hover {
+    background: inherit;
+    box-shadow: inset 0 -3px #ffffff;
+}
+
+/* you can set a style on hover for any module like this */
+#pulseaudio:hover {
+    /*background-color: #a37800;*/
+}
+
+#workspaces button {
+    padding: 0 4px;
+    /*background-color: transparent;*/
+    color: #ffffff;
+}
+
+#workspaces button:hover {
+    background: rgba(0, 0, 0, 0.2);
+}
+
+#workspaces button.focused {
+    background-color: #64727D;
+    /*box-shadow: inset 0 -3px #ffffff;*/
+}
+
+#workspaces button.urgent {
+    background-color: #eb4d4b;
+}
+
+#mode {
+    background-color: #64727D;
+    box-shadow: inset 0 -3px #ffffff;
+}
+
+#clock,
+#battery,
+#cpu,
+#memory,
+#disk,
+#temperature,
+#backlight,
+#network,
+#pulseaudio,
+#wireplumber,
+#custom-media,
+#tray,
+#mode,
+#idle_inhibitor,
+#scratchpad,
+#power-profiles-daemon,
+#mpd {
+    padding: 0 10px;
+    color: #ffffff;
+}
+
+#window,
+#workspaces {
+    margin: 0 4px;
+}
+
+/* If workspaces is the leftmost module, omit left margin */
+.modules-left > widget:first-child > #workspaces {
+    margin-left: 0;
+}
+
+/* If workspaces is the rightmost module, omit right margin */
+.modules-right > widget:last-child > #workspaces {
+    margin-right: 0;
+}
+
+#clock {
+   /* background-color: #64727D;*/
+}
+
+#battery {
+    /*background-color: #ffffff;
+    color: #000000;*/
+}
+
+#battery.charging, #battery.plugged {
+    /*color: #ffffff;
+    background-color: #26A65B;*/
+}
+
+@keyframes blink {
+    to {
+        background-color: #ffffff;
+        color: #000000;
+    }
+}
+
+/* Using steps() instead of linear as a timing function to limit cpu usage */
+#battery.critical:not(.charging) {
+    background-color: #f53c3c;
+    color: #ffffff;
+    animation-name: blink;
+    animation-duration: 0.5s;
+    animation-timing-function: steps(12);
+    animation-iteration-count: infinite;
+    animation-direction: alternate;
+}
+
+#power-profiles-daemon {
+    padding-right: 15px;
+}
+
+#power-profiles-daemon.performance {
+    background-color: #f53c3c;
+    color: #ffffff;
+}
+
+#power-profiles-daemon.balanced {
+    background-color: #2980b9;
+    color: #ffffff;
+}
+
+#power-profiles-daemon.power-saver {
+    background-color: #2ecc71;
+    color: #000000;
+}
+
+label:focus {
+    background-color: #000000;
+}
+
+#cpu {
+    background-color: #2ecc71;
+    color: #000000;
+}
+
+#memory {
+    background-color: #9b59b6;
+}
+
+#disk {
+    background-color: #964B00;
+}
+
+#backlight {
+    background-color: #90b1b1;
+}
+
+#network {
+    /*background-color: #2980b9;*/
+}
+
+#network.disconnected {
+    /*background-color: #f53c3c;*/
+}
+
+#pulseaudio {
+    /*background-color: #f1c40f;*/
+    /*color: #000000;*/
+}
+
+#pulseaudio.muted {
+    /*background-color: #90b1b1;*/
+    /*color: #2a5c45;*/
+}
+
+#wireplumber {
+    background-color: #fff0f5;
+    color: #000000;
+}
+
+#wireplumber.muted {
+    background-color: #f53c3c;
+}
+
+#custom-media {
+    background-color: #66cc99;
+    color: #2a5c45;
+    min-width: 100px;
+}
+
+#custom-media.custom-spotify {
+    background-color: #66cc99;
+}
+
+#custom-media.custom-vlc {
+    background-color: #ffa000;
+}
+
+#temperature {
+    background-color: #f0932b;
+}
+
+#temperature.critical {
+    background-color: #eb4d4b;
+}
+
+#tray {
+    /*background-color: #2980b9;*/
+}
+
+#tray > .passive {
+    -gtk-icon-effect: dim;
+}
+
+#tray > .needs-attention {
+    -gtk-icon-effect: highlight;
+    background-color: #eb4d4b;
+}
+
+#idle_inhibitor {
+    background-color: #2d3436;
+}
+
+#idle_inhibitor.activated {
+    background-color: #ecf0f1;
+    color: #2d3436;
+}
+
+#mpd {
+    background-color: #66cc99;
+    color: #2a5c45;
+}
+
+#mpd.disconnected {
+    background-color: #f53c3c;
+}
+
+#mpd.stopped {
+    background-color: #90b1b1;
+}
+
+#mpd.paused {
+    background-color: #51a37a;
+}
+
+#language {
+    background: #00b093;
+    color: #740864;
+    padding: 0 5px;
+    margin: 0 5px;
+    min-width: 16px;
+}
+
+#keyboard-state {
+    background: #97e1ad;
+    color: #000000;
+    padding: 0 0px;
+    margin: 0 5px;
+    min-width: 16px;
+}
+
+#keyboard-state > label {
+    padding: 0 5px;
+}
+
+#keyboard-state > label.locked {
+    background: rgba(0, 0, 0, 0.2);
+}
+
+#scratchpad {
+    background: rgba(0, 0, 0, 0.2);
+}
+
+#scratchpad.empty {
+	background-color: transparent;
+}
+
+#privacy {
+    padding: 0;
+}
+
+#privacy-item {
+    padding: 0 5px;
+    color: white;
+}
+
+#privacy-item.screenshare {
+    background-color: #cf5700;
+}
+
+#privacy-item.audio-in {
+    background-color: #1ca000;
+}
+
+#privacy-item.audio-out {
+    background-color: #0069d4;
+}

.config/nvim/lazy-lock.json

@@ -1,13 +0,0 @@
-{
-  "black-metal-theme-neovim": { "branch": "main", "commit": "6d0207871387077f40d5396ab1ae90520e688d36" },
-  "lazy.nvim": { "branch": "main", "commit": "85c7ff3711b730b4030d03144f6db6375044ae82" },
-  "mason-lspconfig.nvim": { "branch": "main", "commit": "3b3571b4dadbcb464804466e9872e7246c316af7" },
-  "mason.nvim": { "branch": "main", "commit": "57e5a8addb8c71fb063ee4acda466c7cf6ad2800" },
-  "mini.completion": { "branch": "main", "commit": "7c5edfc0e479dd4edd898cc9ddd1920d8c1ce420" },
-  "mini.nvim": { "branch": "main", "commit": "6bd3a01aaf7d248aea1b78aacdd5d44bffa002c1" },
-  "nvim-lspconfig": { "branch": "master", "commit": "07f4e93de92e8d4ea7ab99602e3a8c9ac0fb778a" },
-  "nvim-treesitter": { "branch": "master", "commit": "42fc28ba918343ebfd5565147a42a26580579482" },
-  "plenary.nvim": { "branch": "master", "commit": "b9fd5226c2f76c951fc8ed5923d85e4de065e509" },
-  "telescope.nvim": { "branch": "master", "commit": "84b9ba066d1860f7a586ce9cd732fd6c4f77d1d9" },
-  "vim-tmux-navigator": { "branch": "master", "commit": "c45243dc1f32ac6bcf6068e5300f3b2b237e576a" }
-}

.config/nvim/lua/plugins/mason.lua

@@ -1,54 +1,53 @@
 return {
     "mason-org/mason-lspconfig.nvim",
-	dependencies = {
+    dependencies = {
-	    {"mason-org/mason.nvim"},
+        {"mason-org/mason.nvim"},
-		{'neovim/nvim-lspconfig'},
+        {'neovim/nvim-lspconfig'},
 
-		{'nvim-mini/mini.nvim'},
+        {'nvim-mini/mini.nvim'},
         {'nvim-mini/mini.completion'},
-	},
+    },
-	config = function()
+    config = function()
-		require("mason").setup()
+        require("mason").setup()
         require("mason-lspconfig").setup {}
 
-		-- NOTE: this is meant to be backwards compatible with Neovim v0.9
+        -- NOTE: this is meant to be backwards compatible with Neovim v0.9
-		---
+        ---
-		-- Autocompletion
+        -- Autocompletion
-		---
+        ---
+        --require('mini.snippets').setup()
+        require('mini.completion').setup()
 
-		require('mini.snippets').setup()
+        ---
-		require('mini.completion').setup()
+        -- Language server configuration
+        ---
 
-		---
+        -- These keymaps are the defaults in Neovim v0.10
-		-- Language server configuration
+        if vim.fn.has('nvim-0.11') == 0 then
-		---
+            -- NOTE: vim.diagnostic.goto_* methods are deprecated in v0.11
+            -- that's why we put these under a conditional block
+            vim.keymap.set('n', '[d', '<cmd>lua vim.diagnostic.goto_prev()<cr>')
+            vim.keymap.set('n', ']d', '<cmd>lua vim.diagnostic.goto_next()<cr>')
+            vim.keymap.set('n', '<C-w>d', '<cmd>lua vim.diagnostic.open_float()<cr>')
+            vim.keymap.set('n', '<C-w><C-d>', '<cmd>lua vim.diagnostic.open_float()<cr>')
+        end
 
-		-- These keymaps are the defaults in Neovim v0.10
+        vim.api.nvim_create_autocmd('LspAttach', {
-		if vim.fn.has('nvim-0.11') == 0 then
+            callback = function(event)
-			-- NOTE: vim.diagnostic.goto_* methods are deprecated in v0.11
+                local bufmap = function(mode, rhs, lhs)
-			-- that's why we put these under a conditional block
+                    vim.keymap.set(mode, rhs, lhs, {buffer = event.buf})
-			vim.keymap.set('n', '[d', '<cmd>lua vim.diagnostic.goto_prev()<cr>')
+                end
-			vim.keymap.set('n', ']d', '<cmd>lua vim.diagnostic.goto_next()<cr>')
-			vim.keymap.set('n', '<C-w>d', '<cmd>lua vim.diagnostic.open_float()<cr>')
-			vim.keymap.set('n', '<C-w><C-d>', '<cmd>lua vim.diagnostic.open_float()<cr>')
-		end
 
-		vim.api.nvim_create_autocmd('LspAttach', {
+                -- These keymaps are the defaults in Neovim v0.11
-			callback = function(event)
+                bufmap('n', 'K', '<cmd>lua vim.lsp.buf.hover()<cr>')
-				local bufmap = function(mode, rhs, lhs)
+                bufmap('n', 'grr', '<cmd>lua vim.lsp.buf.references()<cr>')
-					vim.keymap.set(mode, rhs, lhs, {buffer = event.buf})
+                bufmap('n', 'gri', '<cmd>lua vim.lsp.buf.implementation()<cr>')
-				end
+                bufmap('n', 'grn', '<cmd>lua vim.lsp.buf.rename()<cr>')
-
+                bufmap('n', 'gra', '<cmd>lua vim.lsp.buf.code_action()<cr>')
-				-- These keymaps are the defaults in Neovim v0.11
+                bufmap('n', 'gO', '<cmd>lua vim.lsp.buf.document_symbol()<cr>')
-				bufmap('n', 'K', '<cmd>lua vim.lsp.buf.hover()<cr>')
+                bufmap({'i', 's'}, '<C-s>', '<cmd>lua vim.lsp.buf.signature_help()<cr>')
-				bufmap('n', 'grr', '<cmd>lua vim.lsp.buf.references()<cr>')
+            end,
-				bufmap('n', 'gri', '<cmd>lua vim.lsp.buf.implementation()<cr>')
+        })
-				bufmap('n', 'grn', '<cmd>lua vim.lsp.buf.rename()<cr>')
-				bufmap('n', 'gra', '<cmd>lua vim.lsp.buf.code_action()<cr>')
-				bufmap('n', 'gO', '<cmd>lua vim.lsp.buf.document_symbol()<cr>')
-				bufmap({'i', 's'}, '<C-s>', '<cmd>lua vim.lsp.buf.signature_help()<cr>')
-			end,
-		})
 
     end
 }

.config/nvim/lua/plugins/treesitter.lua

@@ -2,45 +2,48 @@ return {
     "nvim-treesitter/nvim-treesitter",
     build = ":TSUpdate",
     config = function()
-        require("nvim-treesitter.configs").setup {
+        require("nvim-treesitter").install({})
-            -- A list of parser names, or "all" (the five listed parsers should always be installed)
-            ensure_installed = { "c", "lua", "vim", "vimdoc", "python", "bash", "make" },
 
-            -- Install parsers synchronously (only applied to `ensure_installed`)
+        --require("nvim-treesitter.configs").setup ({
-            sync_install = false,
+        --    -- A list of parser names, or "all" (the five listed parsers should always be installed)
+        --    ensure_installed = { "c", "lua", "vim", "vimdoc", "python", "bash", "make" },
 
-            -- Automatically install missing parsers when entering buffer
+        --    -- Install parsers synchronously (only applied to `ensure_installed`)
-            -- Recommendation: set to false if you don't have `tree-sitter` CLI installed locally
+        --    sync_install = false,
-            auto_install = true,
 
-            -- List of parsers to ignore installing (for "all")
+        --    -- Automatically install missing parsers when entering buffer
-            ignore_install = { "javascript" },
+        --    -- Recommendation: set to false if you don't have `tree-sitter` CLI installed locally
+        --    auto_install = true,
 
-            ---- If you need to change the installation directory of the parsers (see -> Advanced Setup)
+        --    -- List of parsers to ignore installing (for "all")
-            -- parser_install_dir = "/some/path/to/store/parsers", -- Remember to run vim.opt.runtimepath:append("/some/path/to/store/parsers")!
+        --    ignore_install = { "javascript" },
 
-            highlight = {
+        --    ---- If you need to change the installation directory of the parsers (see -> Advanced Setup)
-                enable = true,
+        --    -- parser_install_dir = "/some/path/to/store/parsers", -- Remember to run vim.opt.runtimepath:append("/some/path/to/store/parsers")!
 
-                -- NOTE: these are the names of the parsers and not the filetype. (for example if you want to
+        --    highlight = {
-                -- disable highlighting for the `tex` filetype, you need to include `latex` in this list as this is
+        --        enable = true,
-                -- the name of the parser)
-                -- list of language that will be disabled
-                -- disable = { "c", "rust" },
-                -- Or use a function for more flexibility, e.g. to disable slow treesitter highlight for large files
-                disable = function(lang, buf)
-                    local max_filesize = 100 * 1024 -- 100 KB
-                    local ok, stats = pcall(vim.loop.fs_stat, vim.api.nvim_buf_get_name(buf))
-                    if ok and stats and stats.size > max_filesize then
-                        return true
-                    end
-                end,
 
-                -- Setting this to true will run `:h syntax` and tree-sitter at the same time.
+        --        -- NOTE: these are the names of the parsers and not the filetype. (for example if you want to
-                -- Set this to `true` if you depend on 'syntax' being enabled (like for indentation).
+        --        -- disable highlighting for the `tex` filetype, you need to include `latex` in this list as this is
-                -- Using this option may slow down your editor, and you may see some duplicate highlights.
+        --        -- the name of the parser)
-                -- Instead of true it can also be a list of languages
+        --        -- list of language that will be disabled
-                additional_vim_regex_highlighting = false,
+        --        -- disable = { "c", "rust" },
-            },
+        --        -- Or use a function for more flexibility, e.g. to disable slow treesitter highlight for large files
-        }
+        --        disable = function(lang, buf)
-end }
+        --            local max_filesize = 100 * 1024 -- 100 KB
+        --            local ok, stats = pcall(vim.loop.fs_stat, vim.api.nvim_buf_get_name(buf))
+        --            if ok and stats and stats.size > max_filesize then
+        --                return true
+        --            end
+        --        end,
+
+        --        -- Setting this to true will run `:h syntax` and tree-sitter at the same time.
+        --        -- Set this to `true` if you depend on 'syntax' being enabled (like for indentation).
+        --        -- Using this option may slow down your editor, and you may see some duplicate highlights.
+        --        -- Instead of true it can also be a list of languages
+        --        additional_vim_regex_highlighting = false,
+        --    },
+        --})
+    end 
+}

.config/sway/config

@@ -1,5 +1,6 @@
 #font 'JetBrainsMono NF' 9
-font 'JetBrainsMono Nerd Font Mono' 9
+#font 'JetBrainsMono Nerd Font Mono' 9
+font 'JetBrainsMonoNFM-Regular' 9
 
 ### Variables
 #set $mod Mod1
@@ -18,7 +19,6 @@ set $right l
 
 set $laptop eDP-1
 include ~/.config/sway/config.d/*
-exec systemctl --user start shikane 
 
 ### Output configuration
 # You can get the names of your outputs by running: swaymsg -t get_outputs
@@ -48,13 +48,24 @@ exec_always --no-startup-id '/home/jozamudi/.config/sway/scripts/clamshell-mode.
 
 seat seat0 xcursor_theme Adwaita 35
 
-# Auto start .desktop files using dex
+#exec pipewire
-exec pipewire
 exec swaync
-exec waybar 
+exec shikane
-exec mpd
+exec nm-applet
+exec blueman-applet
+
+exec systemctl --user start hyperolkitagent
+exec waybar -c ~/.config/sway/waybar/config.jsonc -s ~/.config/sway/waybar/style.css
+exec flatpak run com.github.wwmm.easyeffects -w
+exec xrdb -merge ~/.Xresources
+exec wl-paste -t text --watch clipman store --no-persist
+
+#exec mpd
+#exec syncthing
+
+# Auto start .desktop files using dex
 exec dex -a
-exec syncthing
+
 #exec wl-paste -t text --watch clipman store --no-persist
 # There are two wl-paste processes running, one for the primary and one for the normal clipboard
 exec                     wl-paste    -t text --watch clipman store

.config/sway/waybar

@@ -0,0 +1 @@
+/home/jozamudi/.dotfiles/.config/waybar

.config/tmux/tmux.conf

@@ -3,7 +3,7 @@ set -g default-terminal "xterm-256color"
 
 bind-key r source-file ~/.config/tmux/tmux.conf \; display "Reloaded!"
 
-set-option -g default-shell /bin/zsh
+#set-option -g default-shell /bin/zsh
 
 # remap prefix
 unbind C-b
@@ -51,9 +51,9 @@ set-option -g update-environment "SSH_AUTH_SOCK \
     SSH_CONNECTION \
     DISPLAY "
 		
-set -g status-position bottom
+# set -g status-position bottom
-set -g status-left " #{session_name} "
+# set -g status-left " #{session_name} "
-set -g status-right ""
+# set -g status-right ""
-set -g status-right-length 100
+# set -g status-right-length 100
 # set -g status-style 'fg=default'
 

.config/waybar/config.jsonc

@@ -1,65 +1,24 @@
 // -*- mode: jsonc -*-
 {
-    // "layer": "top", // Waybar at top layer
-    // "position": "bottom", // Waybar position (top|bottom|left|right)
-    //"height": 10, // Waybar height (to be removed for auto height)
-    // "width": 1280, // Waybar width
     "spacing": 2, // Gaps between modules (4px)
-    // Choose the order of the modules
     "modules-left": [
         "sway/workspaces",
         "sway/mode",
         "sway/scratchpad",
-        "custom/media",
         "sway/window"
     ],
     //"modules-center": [
         //"sway/window"
     //],
     "modules-right": [
-        "mpd",
+        //"mpd",
-        //"custom/audio_idle_inhibitor",
         "pulseaudio",
-        "network",
+        //"network",
-        //"power-profiles-daemon",
-        //"cpu",
-        //"memory",
-        //"temperature",
-        //"backlight",
-        //"keyboard-state",
-        //"sway/language",
         "battery",
-        //"battery#bat2",
         "clock",
         "tray"
         //"custom/power"
     ],
-    // Modules configuration
-    // "sway/workspaces": {
-    //     "disable-scroll": true,
-    //     "all-outputs": true,
-    //     "warp-on-scroll": false,
-    //     "format": "{name}: {icon}",
-    //     "format-icons": {
-    //         "1": "",
-    //         "2": "",
-    //         "3": "",
-    //         "4": "",
-    //         "5": "",
-    //         "urgent": "",
-    //         "focused": "",
-    //         "default": ""
-    //     }
-    // },
-    "keyboard-state": {
-        "numlock": true,
-        "capslock": true,
-        "format": "{name} {icon}",
-        "format-icons": {
-            "locked": "",
-            "unlocked": ""
-        }
-    },
     "sway/mode": {
         "format": "<span style=\"italic\">{}</span>"
     },
@@ -70,42 +29,6 @@
         "tooltip": true,
         "tooltip-format": "{app}: {title}"
     },
-    "mpd": {
-        "format": "{stateIcon} {consumeIcon}{randomIcon}{repeatIcon}{singleIcon}{artist} - {title} ⸨{songPosition}|{queueLength}⸩% ",
-				"format-alt": "{stateIcon} {consumeIcon}{randomIcon}{repeatIcon}{singleIcon}{artist} - {album} - {title} ({elapsedTime:%M:%S}/{totalTime:%M:%S}) ⸨{songPosition}|{queueLength}⸩% ",
-        "format-disconnected": "Disconnected ",
-        //"format-stopped": "{consumeIcon}{randomIcon}{repeatIcon}{singleIcon}Stopped ",
-        "format-stopped": "",
-        //"unknown-tag": "N/A",
-        "unknown-tag": "",
-        "interval": 5,
-        "consume-icons": {
-            "on": " "
-        },
-        "random-icons": {
-            "off": "<span color=\"#f53c3c\"></span> ",
-            "on": " "
-        },
-        "repeat-icons": {
-            "on": " "
-        },
-        "single-icons": {
-            "on": "1 "
-        },
-        "state-icons": {
-            "paused": "",
-            "playing": ""
-        },
-        "tooltip-format": "MPD (connected)",
-        "tooltip-format-disconnected": "MPD (disconnected)"
-    },
-    "idle_inhibitor": {
-        "format": "{icon}",
-        "format-icons": {
-            "activated": "",
-            "deactivated": ""
-        }
-    },
     "tray": {
         // "icon-size": 21,
         "spacing": 10,
@@ -121,26 +44,6 @@
 				//"format": "{:%R %p  %Y-%m-%d}",
         //"format-alt": "{:%Y-%m-%d}"
     },
-    "cpu": {
-        "format": "{usage}% ",
-        "tooltip": false
-    },
-    "memory": {
-        "format": "{}% "
-    },
-    "temperature": {
-        // "thermal-zone": 2,
-        // "hwmon-path": "/sys/class/hwmon/hwmon2/temp1_input",
-        "critical-threshold": 80,
-        // "format-critical": "{temperatureC}°C {icon}",
-        "format": "{temperatureC}°C {icon}",
-        "format-icons": ["", "", ""]
-    },
-    "backlight": {
-        // "device": "acpi_video1",
-        "format": "{percent}% {icon}",
-        "format-icons": ["", "", "", "", "", "", "", "", ""]
-    },
     "battery": {
         "states": {
             // "good": 95,
@@ -172,18 +75,19 @@
     },
     "network": {
         // "interface": "wlp2*", // (Optional) To force the use of this interface
-        "format-wifi": "{essid} ({signalStrength}%) ",
+        //"format-wifi": "{essid} ({signalStrength}%) ",
-        "format-ethernet": "{ipaddr}/{cidr} ",
+        //"format-ethernet": "{ipaddr}/{cidr} ",
-        "tooltip-format": "{ifname} via {gwaddr} ",
+        //"tooltip-format": "{ifname} via {gwaddr} ",
-        "format-linked": "{ifname} (No IP) ",
+        //"format-linked": "{ifname} (No IP) ",
-        "format-disconnected": "Disconnected ⚠",
+        //"format-disconnected": "Disconnected ⚠",
+        "format-disconnected": "Disconnected",
         "format-alt": "{ifname}: {ipaddr}/{cidr}"
     },
     "pulseaudio": {
         // "scroll-step": 1, // %, can be a float
-        "format": "{volume}% {icon} {format_source}",
+        "format": "{volume}%  {icon}   {format_source}",
         "format-bluetooth": "{volume}% {icon}  {format_source}",
-        "format-bluetooth-muted": " {icon}  {format_source}",
+        "format-bluetooth-muted": "  {icon}  {format_source}",
         "format-muted": " {format_source}",
         "format-source": "{volume}% ",
         "format-source-muted": "",
@@ -209,29 +113,5 @@
         "escape": true,
         "exec": "$HOME/.config/waybar/mediaplayer.py 2> /dev/null" // Script in resources folder
         // "exec": "$HOME/.config/waybar/mediaplayer.py --player spotify 2> /dev/null" // Filter player based on name
-    },
+    }
-    "custom/power": {
-        "format" : "⏻ ",
-		"tooltip": false,
-		"menu": "on-click",
-		"menu-file": "$HOME/.config/waybar/power_menu.xml", // Menu file in resources folder
-		"menu-actions": {
-			"shutdown": "shutdown",
-			"reboot": "reboot",
-			"suspend": "systemctl suspend",
-			"hibernate": "systemctl hibernate"
-		}
-    },
-		"custom/audio_idle_inhibitor": {
-		"format": "{icon} ",
-		"exec": "sway-audio-idle-inhibit --dry-print-both-waybar",
-		"exec-if": "which sway-audio-idle-inhibit",
-		"return-type": "json",
-		"format-icons": {
-			"output": "",
-			"input": "",
-			"output-input": "  ",
-			"none": ""
-		}
-	}
 }

.config/waybar/style.css

@@ -1,8 +1,10 @@
 * {
     /* `otf-font-awesome` is required to be installed for icons */
     /*font-family: FontAwesome, Roboto, Helvetica, Arial, sans-serif; */
-	font-family: "JetBrainsMono NF";
+	/*font-family: "JetBrainsMono NF";*/
-    font-size: 13px;
+    font-family: "JetBrainsMonoNFM-Regular";
+    font-size: 14px;
+    font-weight: bold;
 }
 
 window#waybar {

.gitignore

@@ -1 +1 @@
-./.config/nvim/lazy-lock.json
+.config/nvim/lazy-lock.json

.zshrc

@@ -0,0 +1,36 @@
+# Auto Complete
+autoload -Uz compinit
+compinit
+
+# enable color support of ls and also add handy aliases
+if [ -x /usr/bin/dircolors ]; then
+    test -r ~/.dircolors && eval "$(dircolors -b ~/.dircolors)" || eval "$(dircolors -b)"
+    alias ls='ls --color=auto'
+    alias dir='dir --color=auto'
+    alias vdir='vdir --color=auto'
+    alias grep='grep --color=auto'
+    alias fgrep='fgrep --color=auto'
+    alias egrep='egrep --color=auto'
+fi
+
+# some more ls aliases
+alias ll='ls -alF'
+alias la='ls -A'
+alias l='ls -CF'
+
+
+# Alias
+alias vim='nvim'
+alias ssh='ssh -XC'
+
+# Config
+source <(fzf --zsh)
+
+autoload -Uz vcs_info
+precmd_vcs_info() { vcs_info }
+precmd_functions+=( precmd_vcs_info )
+setopt prompt_subst
+RPROMPT='${vcs_info_msg_0_}'
+#PROMPT='${vcs_info_msg_0_}%# '
+PROMPT='%~%# '
+zstyle ':vcs_info:git:*' formats '%b'